Product Description
ORACAL 7510 is a 6-mil fluorescent cast PVC film — the long-life member of ORAFOL's fluorescent line. It shines in full daylight and holds its intensity at dawn, dusk and in fog, rain and other poor-visibility conditions, and it stays bright roughly twice as long as the economy 6510.
Thirty inches covers door panels, chevron panels, P.O.P. headers and oversized numbers in a single pass. At 10 yards you get 75 square feet — enough for a real job, small enough to try the width or a color before committing to a production roll.
Where it works
- Car, truck, van and trailer graphics
- Motorsport numbers and race graphics
- Emergency vehicle and boat safety graphics
- Point-of-purchase displays and retail signage
- Labels, decals and window copy
- Bicycle, helmet and personal safety markings
ORAFOL rates the film for flat and conformable short-term applications. It is a premium cast film — it cuts and weeds cleanly, and at 120% elongation it takes gentle curves and corrugations more willingly than the 6510. It is still not a wrap film and is not rated for deep recesses or compound curves.
Outdoor durability by color
| Color | ORAFOL item no. | Minimum life expectancy (unprinted, vertical) |
6510 equivalent |
|---|---|---|---|
| Fluorescent Yellow | 029 | 3 years | 2 years |
| Fluorescent Orange | 037 | 2 years | 1 year |
| Fluorescent Red Orange | 038 | 2 years | 1 year |
| Fluorescent Red | 039 | 2 years | 1 year |
| Fluorescent Pink | 046 | 2 years | 1 year |
| Fluorescent Green | 069 | 2 years | 1 year |
Durability figures are ORAFOL's published minimum life expectancy for unprinted film on vertical surfaces, Climate Zone 1. Fluorescent pigments are inherently less UV-stable than standard pigments — under the high-UV, high-heat exposure typical of Arizona, Nevada and inland Southern California, expect the fluorescent effect to dull sooner than the published figure. Horizontal and sloped surfaces reduce service life further. Screen colors are approximate; ask us for a sample before committing to a color match.
Technical data
| Film construction | Premium performance fluorescent cast PVC |
|---|---|
| Thickness | 6 mil (film only, without liner and adhesive) |
| Finish | Semi-gloss |
| Adhesive | Clear, solvent-based, permanent |
| Adhesive power | 4.1 lb/in on stainless steel (FINAT TM-1, 24 hr average) |
| Release liner | 84# silicone-coated paper |
| Temperature resistance | -40°F to +230°F on aluminum, no variation |
| Minimum application temperature | 46°F |
| Dimensional stability | Adhered to steel: no shrinkage across; less than 0.012" in length (FINAT TM-14) |
| Tensile strength | Min. 15 MPa along and across (DIN EN ISO 527) |
| Elongation at break | Min. 120% along and across (DIN EN ISO 527) |
| Fire behavior | Self-extinguishing on steel (DIN 75200) |
| Fire rating | ASTM E84-07 Class A |
| Print compatibility | Screen printing and thermal transfer only |
| Shelf life | 2 years in original packaging at 68°F / 50% RH |
| Roll size (this listing) | 30" x 10 yd (30 ft) — 75 sq ft |
| Also available | 30" x 50 yd; 24" and 48" widths in 10 yd and 50 yd |
Application tapes
ORAFOL recommends ORATAPE HT55 (paper) and ORATAPE MT95 (clear, conformable) for transferring cut 7510 graphics. HT55 is the everyday choice for lettering and numbers; MT95 is worth the upgrade when you need to see registration through the tape or the graphic has to lay into a curve. Order tape wide enough to clear a 30" panel so you are not piecing transfers together.
Surface prep
Clean the substrate completely — dust, grease, wax and residue all cost you adhesion. Freshly painted or lacquered surfaces must be fully cured before application, and paint and clear-coat compatibility should be tested on a small area first. Roll numbers support batch traceability under ISO 9001, so keep the label if the job may need color-matched additions later.
Common questions
7510 or 6510?
Same six colors, same semi-gloss cast PVC, same adhesive family — the difference is life and body. 7510 is 6 mil against 6510's 4 mil, has a stronger 4.1 lb/in bond, stretches further at 120% elongation, and lasts roughly twice as long: 3 years in fluorescent yellow and 2 years in the other colors, against 2 and 1. Buy 6510 for a race weekend, a seasonal promotion or a graphic coming off in a few months. Buy 7510 when the graphic has to look right through more than one summer, or when reinstalling it is expensive.
Should I buy this or the 30" x 50 yd?
The 50 yard roll runs roughly 22% cheaper per square foot. If a color turns regularly, buy the 50 yard. Use this 10 yard roll to test a color, cover a single job, or keep a slower-moving color on the shelf without tying up cash.
Will fluorescent vinyl glow in the dark?
No. Fluorescent film converts UV energy in daylight into visible light, which is why it looks unnaturally bright at dawn, dusk and under overcast skies. It needs a light source. For genuine glow-in-the-dark performance, look at photoluminescent films instead.
Can I laminate it?
An overlaminate adds abrasion resistance, but it also filters the UV that makes the film fluoresce, which mutes the effect and works against the reason you bought the premium film. If the graphic will take physical abuse, laminate it and accept a duller appearance. If brightness is the point, leave it unlaminated.
How long will an unopened roll keep?
Two years in the original packaging at 68°F and 50% relative humidity. Store rolls upright or suspended, out of direct sun, and away from heat — a hot shop ceiling is the fastest way to age vinyl that has not been used yet.
Ordering and shipping
Buying multiple rolls, or need this slit to a custom width? Email sales@kgsupplies.com or call (602) 272-8655 for a quote. KG Supplies also delivers overnight throughout Arizona, Nevada, New Mexico and Colorado from our Phoenix warehouse, and ships nationwide.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
ORACAL and ORATAPE are registered trademarks of ORAFOL Europe GmbH. Specifications from the ORAFOL Americas ORACAL 7510 technical datasheet, rev. 05/2026, and are subject to change without notice.
