Product Description
Metamark MD-MW-R9 MetaWalk Textured Floor Graphic — 54" × 33 Yards
Metamark MD-MW-R9 MetaWalk is a white textured printable floor graphic film designed for temporary indoor advertising, promotional graphics, directional signage, retail displays, events, and branded interior spaces.
This one-part floor graphic system features an integrated textured anti-slip surface, eliminating the need for a separate floor-graphic overlaminate. It is suitable for regular levels of pedestrian traffic when properly printed, installed, and maintained.
The high-opacity white face film produces vibrant print results with strong color intensity. Its 170-micron monomeric calendered construction provides the thickness and handling stability needed for floor graphic applications.
Metamark MD-MW-R9 can be applied to suitable smooth indoor floors in good condition and indoor short-pile carpet. It is compatible with solvent, eco-solvent, latex, and UV printing.
Roll Size: 54 inches × 33 yards
Product Features
- White textured printable floor graphic film
- One-part system with no separate overlaminate required
- Textured anti-slip surface
- DIN 51130 R9 slip rating
- Tested under BS 7976-2:2002 using Slider 96
- Designed for regular levels of indoor foot traffic
- High-opacity white film
- Produces vibrant printed colors
- 170-micron monomeric calendered PVC
- Permanent solvent-based acrylic adhesive
- Suitable for smooth indoor floors in good condition
- Suitable for indoor short-pile carpet
- Compatible with solvent, eco-solvent, latex, and UV inks
- Typical indoor durability of three to six months
- REACH and RoHS compliant
Recommended Applications
- Retail floor graphics
- Directional and wayfinding graphics
- Point-of-sale promotions
- Trade-show and exhibition floors
- Event branding
- Temporary indoor advertising
- Corporate interior branding
- Showroom floor graphics
- Sports and motorsports displays
- Stair graphics where separately tested and approved
- Indoor short-pile carpet graphics
Technical Specifications
| Product | Metamark MD-MW-R9 MetaWalk |
| Roll Size | 54" × 33 Yards |
| Color and Finish | White Textured |
| Film Type | Monomeric Calendered PVC |
| Film Thickness | 170 Microns Nominal |
| Adhesive | Apex Permanent Solvent-Based Acrylic |
| Release Liner | 140 gsm Layflat PE-Coated Liner |
| Slip Rating | DIN 51130 R9 |
| Additional Slip Test | BS 7976-2:2002, Slider 96 |
| Compatible Inks | Solvent, Eco-Solvent, Latex and UV |
| Recommended Surfaces | Smooth Indoor Floors and Indoor Short-Pile Carpet |
| Indoor Durability | Approximately 3–6 Months |
| Shelf Life | 2 Years Under Recommended Storage Conditions |
| Overlaminate Required | No — One-Part Textured System |
Printing and Installation Recommendations
Always perform a test print using the correct printer profile, ink limits, and heater settings. Allow the printed material to cure completely before cutting, handling, or installing.
Install only on clean, dry, smooth indoor flooring in good condition or on suitable indoor short-pile carpet. Remove dust, grease, wax, polish, cleaning residue, and other contaminants before installation.
Test the intended floor or carpet before production. Adhesion and removability can vary depending on the flooring material, coating, surface texture, cleaning products, temperature, traffic level, and installation duration.
Inspect the graphic regularly after installation. Replace or remove graphics that show lifting edges, excessive wear, damage, contamination, or reduced slip resistance.
Important: Slip performance can be affected by printing, ink coverage, surface contamination, moisture, wear, installation quality, and maintenance. The installer and facility operator are responsible for evaluating the completed installation for the intended environment.
Printed, processed, and custom-cut materials are not returnable.
