• Arlon DPF 510GTR/MTR is a 100-micron (4-mil) calendered digital print vinyl with a removable solvent-based pressure-sensitive adhesive — engineered for short-term graphics that need to come off cleanly. Removable for up to one year on most substrates, with consistent print quality across Eco-Solvent, Solvent, UV, and Latex platforms. Available in white gloss (510GTR) and white matte (510MTR) finishes. EN 14041 floor-graphic-rated when paired with Series 3510 Matte.

    • DPF 510GTR/MTR - 3.2-mil Calendered, Gloss or Matte White, Tinted Removable PSA

    Arlon

    $238.95

    Are you looking to buy in bulk? Email us at sales@kgsupplies.com for your custom quote. 

    (No reviews yet) Write a Review
    SKU:
    DPF 510GTR/MTR
    Condition:
    New
    Availability:
    Manufacture Drop Ship - Ships within 48 hours if in stock at Manufacture (FREE SHIPPING)
    Width:
    54.00 (in)
    Height:
    6.00 (in)
    Depth:
    6.00 (in)
    Adding to cart… category.add_cart_announcement

    Product Description

    Arlon DPF 510GTR/MTR is a 100-micron (4-mil) calendered digital print vinyl with a removable solvent-based pressure-sensitive adhesive — engineered for short-term graphics that need to come off cleanly. Removable for up to one year on most substrates, with consistent print quality across Eco-Solvent, Solvent, UV, and Latex platforms. Available in white gloss (510GTR) and white matte (510MTR) finishes. EN 14041 floor-graphic-rated when paired with Series 3510 Matte.

    Removable up to 1 Year 3-Year Outdoor Durability Tinted Adhesive EN 14041 Floor-Rated Gloss + Matte

    Removable Print Vinyl for Short-Term Graphics That Come Off Clean

    DPF 510GTR/MTR is Arlon's removable-adhesive digital print vinyl — the answer for short-term graphics where clean removal is part of the spec. Retail seasonal promotions, event signage, real estate marketing, trade show graphics, window promotions, and rental property displays all share a common need: the graphic must look great while it's up, then come down cleanly when the campaign ends.

    The "R" in 510GTR/MTR stands for removable. The solvent-based adhesive is engineered to develop a reliable bond on flat surfaces while remaining cleanly removable for up to one year after install — no adhesive residue, no torn paint, no surface damage that triggers landlord callbacks or tenant disputes. The tinted gray adhesive also provides opacity for covering existing graphics during seasonal turnovers.

    One-Year Clean-Removal Window

    Arlon rates DPF 510GTR/MTR as removable for up to one year on most substrates. Within that window, the film lifts cleanly without damaging the surface or leaving adhesive residue. Beyond one year, the adhesive can become more difficult to remove, especially in high-heat or high-UV exposure conditions. Plan removal before the one-year mark for best results.

    Key Features

    • Removable adhesive — clean removal up to one year without surface damage
    • Tinted gray adhesive — opacity for covering existing graphics during re-skin and seasonal work
    • 100-micron (4-mil) calendered vinyl with ≥200% elongation for handling curves
    • Solvent-based adhesive — superior performance vs. water-based removable alternatives
    • Two-sided polycoated liner — excellent lay-flat for clean printer feeding
    • Compatible with all four major ink systems: Eco-Solvent, Solvent, UV, Latex
    • White gloss or white matte finish
    • EN 14041 certified for slip-resistance on interior floor graphics (when paired with Series 3510 Matte)
    • 3-year outdoor durability (unprinted) — printed durability depends on ink system
    • Wide service temp range: -20°F to 150°F

    SKU Variants

    510GTR (White Gloss)

    70–90 Gloss Units
    SKU: 510GTR

    White gloss vinyl with tinted gray removable adhesive. High color saturation for retail displays, window graphics, and promotional signage where vibrant impact matters.

    510MTR (White Matte)

    Up to 30 Gloss Units
    SKU: 510MTR

    White matte vinyl with tinted gray removable adhesive. Low-glare finish for indoor signage, trade show graphics, and floor applications. The required matte finish for EN 14041 floor systems with Series 3510 Matte.

    Ink Compatibility

    DPF 510GTR/MTR is compatible with all four major print platforms:

    Eco-Solvent
    Solvent
    UV
    Latex

    Ideal Applications

    Retail Seasonal Promotions

    Holiday displays, seasonal sale signage, in-store campaigns, and end-cap graphics that turn over every 4–12 weeks. Clean removal means no scraping, no residue, no damaged store fixtures between campaigns.

    Window Graphics

    Storefront window promotions, retail window decals, holiday window paint replacements, and event-driven window signage. Comes off glass cleanly without razor blades or solvents.

    Trade Show & Event Graphics

    Trade show booth panels, conference signage, pop-up event branding, and short-run experiential marketing. Install fast, remove faster.

    POP Displays & Decals

    Point-of-purchase displays, custom decals, branded stickers, and short-term retail merchandising graphics where the install will be replaced or rotated.

    Real Estate & Rental Property

    Open house signage, lease-up graphics, rental property branding, and any application on a property the user doesn't own — where leaving residue or damage on removal is unacceptable.

    Interior Floor Graphics (EN 14041)

    Short-term interior floor graphics on smooth floors, sealed concrete, ceramic tile, waxed vinyl flooring, sealed wood, marble, and terrazzo — when paired with Arlon Series 3510 Matte for EN 14041 slip-resistance.

    EN 14041 Floor Graphic System

    DPF 510MTR (matte version) is approved for short-term interior floor graphic applications when paired with Arlon Series 3510 Matte overlaminate, which carries EN 14041 certification for slip-resistance on floor graphic materials. Approved substrates include:

    Smooth floors
    Sealed concrete
    Ceramic tile
    Waxed vinyl flooring
    Sealed wood
    Marble & terrazzo
    Floor Graphic Service Life & Warranty: Floor graphic systems are intended for short-term interior installations. Arlon does not warranty performance, expected life, or clean removability for floor graphic applications because results vary with foot traffic, surface type, cleaning regimen, and floor condition. Arlon only warrants the material itself for standard manufacturer's defects. Always test on the target surface before full production.

    Technical Specifications

    Property Typical Value
    Film Type Calendered monomeric digital print vinyl, removable pressure-sensitive
    Thickness 100 microns (≈4-mil)
    Surface Finish Gloss (GTR): 70–90 GU  |  Matte (MTR): Up to 30 GU (60° reflection)
    Adhesive Tinted gray, solvent-based, removable pressure-sensitive
    Adhesive Removability Removable for up to 1 year
    Release Liner Two-sided polycoated, lay-flat
    Tensile Strength ≥ 1.8 kg/cm, web direction
    Elongation ≥ 200%
    Peel Adhesion (15 min) ≥ 0.09 kg/cm — PSTC-1, 21°C (low-tack removable)
    Liner Release 21.7 g/cm — TLMI Release at 90°
    Dimensional Stability ≥ 1.00 mm — 70°C, 48 hrs
    Application Temp Range 10°C to 32°C (50°F to 90°F) — clean, dry substrate
    Service Temp Range -29°C to 65°C (-20°F to 150°F)
    Shelf Life 1 year from factory shipment (stored at 21°C / 50% RH)
    Outdoor Durability Up to 3 years (unprinted); printed durability depends on ink system
    Ink Compatibility Eco-Solvent, Solvent, UV, Latex
    Floor Graphic Certification EN 14041 (with Series 3510 Matte overlaminate)
    SKU Variants 510GTR (gloss) / 510MTR (matte)
    Removability Window: "Removable up to one year" is a guideline, not a guarantee. Removability depends on the substrate, surface condition, environmental exposure (UV, heat), and how aggressively the graphic was applied. Plan removal well before the one-year mark to maximize clean-removal success. Test on the actual substrate before committing to large production runs.
    Flat Surfaces Only: DPF 510GTR/MTR is a calendered monomeric film designed for flat applications. It is not suitable for vehicle wraps, complex curves, rivets, or corrugated surfaces. For removable wraps or complex 3D applications, use a removable cast vinyl.
    Lower Initial Tack: The removable adhesive has significantly lower initial tack (≥0.09 kg/cm) than permanent print films like 510GTX/MTX. This is by design — it's what enables clean removal — but it also means the film is more sensitive to substrate cleanliness. Surfaces must be clean, dry, and free of dust, oils, and residue for proper bond development.

    Recommended Overlaminate Pairing

    For protection and to complete the floor-graphic system:

    • Arlon Series 3510 Matte — required pairing for EN 14041 floor-graphic certification, also a strong match for general short-term graphic protection
    • Arlon Series 3510 Gloss — for non-floor short-term graphics where added abrasion resistance is needed

    Note that pairing a removable print film with a permanent overlaminate doesn't change the removability of the system — the adhesive bond to the substrate is what matters for removal, and that's still 510GTR/MTR's removable adhesive.

    Frequently Asked Questions

    What does "removable" actually mean? The adhesive is engineered for clean removal up to one year after install on most substrates. "Clean removal" means the film lifts off without leaving adhesive residue and without damaging the substrate (no torn paint, no glue ghosts, no surface marks). Standard permanent print films, by contrast, are designed to stay put — and removing them after extended service typically damages the substrate.
    Is one year a hard limit? No — one year is the rated removability window, but it's a guideline, not a guarantee. Films installed in low-UV indoor environments often remove cleanly well past one year. Films in high-heat or direct-sun exposure may become harder to remove sooner. Always plan to remove before the one-year mark for best results.
    What's the difference between GTR/MTR and standard 510? The film is similar — calendered, white-faced, two-sided polycoated liner. The adhesive is the difference. Standard DPF 510 (and 510GTX/MTX) has a permanent adhesive engineered to stay put. 510GTR/MTR has a removable adhesive engineered to come off cleanly. Match the film to the project: permanent adhesive for installs that won't be removed, removable adhesive for short-term and seasonal work.
    What surfaces does it remove cleanly from? Smooth painted walls, glass, sealed concrete, ceramic tile, sealed wood, vinyl flooring, marble, terrazzo, and similar non-porous flat surfaces. Porous, raw, or freshly-painted surfaces are riskier — fresh paint can be pulled off when the film is removed. Always test on the actual substrate.
    Can it be used for floor graphics? Yes — the matte version (510MTR) is approved for short-term interior floor graphics when paired with Arlon Series 3510 Matte overlaminate, which carries EN 14041 slip-resistance certification. Approved substrates include smooth floors, sealed concrete, ceramic tile, waxed vinyl flooring, sealed wood, marble, and terrazzo.
    Why is the adhesive tinted gray? The light gray tint provides opacity that hides whatever's underneath the graphic. This is especially valuable for retail seasonal turnovers where you may be applying new graphics over older ones — the tinted adhesive blocks the previous design from showing through.
    Can I use it for vehicle wraps? No. DPF 510GTR/MTR is a calendered monomeric film designed for flat applications. For removable vehicle graphics, use a removable cast vinyl rated for wrap applications.
    What inks can I print on it? All four major print platforms: Eco-Solvent, Solvent, UV, and Latex.
    How long will printed graphics last outdoors? The unprinted film is rated for up to 3 years outdoor durability. Printed durability depends on the ink system — solvent and latex typically perform closest to the unprinted rating. However, the practical limit for removable applications is the one-year removability window — service beyond that point may compromise clean removal.
    Why does the install feel "less sticky" than standard print films? By design. The removable adhesive has significantly lower peel adhesion (≥0.09 kg/cm) than permanent adhesives — that's exactly what enables clean removal later. It also means surfaces need to be cleaner than usual for proper bond development. Wipe substrates with isopropyl alcohol before install.
    What's the shelf life? 1 year from factory shipment when stored in the original box at 21°C (70°F) and 50% relative humidity.

    Why Buy Arlon DPF 510GTR/MTR from KG Supplies

    • Overnight delivery across Arizona, Nevada, New Mexico, and Colorado from our Phoenix warehouse
    • Nationwide UPS shipping with both gloss and matte SKUs kept in stock
    • Authorized Arlon distributor — full product warranty, fresh inventory, accurate lot traceability
    • Floor-graphic system support — we'll help you spec the EN 14041-compliant DPF 510MTR + Series 3510 Matte combination for your project

    Planning a seasonal retail rotation, real estate marketing campaign, or interior floor graphic project? Call KG Supplies at (602) 272-8655 or email Sales@kgsupplies.com — we'll match the right print film and overlaminate for your removability and service-life requirements.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review