Product Description
ORAJET® 3651 Intermediate Calendered PVC Digital Media – 2.75 Mil Polymeric Print Film in Gloss White & Matte White – Widths from 15" to 60"
2.75-Mil Polymeric PVC | UL 969 & CSA Certified | ORALIFE™ Component System Warranty | Splice-Free Guarantee | Seven Widths
ORAJET® 3651 is the film most shops run more of than anything else on the shelf. A thin 2.75-mil polymeric PVC construction with a dependable solvent-based permanent adhesive, built for flat, short- to medium-term work across a wider range of jobs than any specialty film covers: outdoor signage, window graphics, wall murals, floor graphics, stickers and decals, and UL industrial labels.
It is UL certified for UL 969 "Marking and Labeling Systems" in the USA and CSA C22.2 No. 0.15 "Adhesive Labels" in Canada, included in the ORAFOL® (OCS) ORALIFE™ Component System Warranty, and prints on effectively everything — latex, solvent, eco-solvent, UV curable, UV-Gel, and screen printing.
KG Supplies stocks 3651 in Gloss White and Matte White, in widths from 15" up to 60".
ORAFOL specifies 3651 for flat applications, and states plainly that it is not designed for vehicle or trailer wrapping. Spot decals and flat door graphics are within spec when paired with ORAGUARD® 215. Full or partial wraps, compound curves, deep recesses, and rivets are not — that work needs a cast film. If a customer is asking for a wrap, call us and we'll point you at the right material.
Applications & Laminate Pairings
| Application | Notes |
|---|---|
| Medium-term outdoor general signage | Add ORAGUARD® 210 or 215 for UV and abrasion protection |
| Long-term indoor general signage | Interior exposure extends practical service life |
| Vehicle decals | Pair with ORAGUARD® 215 — flat decals only, not wraps |
| Window graphics | First- and second-surface flat glass |
| Permanent wall graphics and murals | Smooth, sound interior and exterior wall surfaces |
| Floor graphics | Pair with ORAGUARD® 250AS or 255AS anti-skid textured floor laminate |
| Stickers and decals | Die-cut and kiss-cut production work |
| UL industrial labels | UL 969 and CSA C22.2 No. 0.15 certified |
Technical Data
| Property | Typical Value |
|---|---|
| Film Type | Intermediate polymeric PVC, calendered |
| Finishes Stocked | Gloss White, Matte White |
| Thickness | 2.75 mil (without liner and adhesive) |
| Adhesive | Grey, solvent-based, permanent |
| Adhesive Power | 4.1 lb/in on stainless steel (FINAT TM-1, 24 hr average) |
| Release Liner | 88# PE-coated silicone paper |
| Certifications | UL 969 (USA); CSA C22.2 No. 0.15 (Canada) |
| Tensile Strength | Min. 19 MPa along and across (DIN EN ISO 527) |
| Elongation at Break | Min. 130% along / min. 150% across (DIN EN ISO 527) |
| Dimensional Stability | Adhered to steel: no cross-direction shrinkage; < 0.016" in length (FINAT TM-14) |
| Temperature Resistance | -40°F to +176°F on aluminum, no variation |
| Minimum Application Temperature | 46°F |
| Fire Behavior / Rating | Self-extinguishing on steel (DIN 75200); ASTM E 84-07 Class "A" |
| Seawater Resistance | Adhered to aluminum, 100 hr at 73°F, no variation (DIN 50 021) |
| Life Expectancy | 5 years unprinted, vertical surfaces, accepted application procedures |
| Shelf Life | 2 years at 68°F / 50% RH |
| Print Compatibility | Latex, solvent, eco-solvent, UV curable, UV-Gel, screen printing |
| Warranty | Included in the ORAFOL® (OCS) ORALIFE™ Component System Warranty |
Available Widths & Lengths
| Roll Length | Available Widths — Gloss White & Matte White |
|---|---|
| 150 ft (50 yard) | 15", 20", 30", 36", 50", 54", 60" |
| 30 ft (10 yard) | 20" only |
Seven widths means less waste on narrow work. Running a run of 12" decals off a 54" roll is money on the floor — the 15" and 20" rolls exist so you don't have to.
Recommended ORAGUARD® Overlaminates
- ORAGUARD® 210 — economical UV and abrasion protection for general signage
- ORAGUARD® 215 — the standard pairing, and the specified laminate for vehicle decals
- ORAGUARD® 215DU — added durability where the graphic sees more handling
- ORAGUARD® 250AS — anti-skid textured laminate for floor graphics
- ORAGUARD® 255AS — anti-skid textured laminate for floor graphics
Printing & Application Notes
Ink Drying
Use ORAFOL ICC profiles from orafolamericas.com. Allow solvent-based inks to dry a minimum of 24 hours — 48 to 72 hours preferred — at 70°F before cutting the graphic or applying a laminate.
Surface Preparation
Clean the substrate thoroughly of dust, grease, and contamination. Freshly lacquered or painted surfaces must be fully cured, and lacquer and paint compatibility should be tested before application. Batch traceability by roll number is available under ISO 9001.
Buying 3651 by the pallet?
This is a stocking item for most shops, and volume pricing is worth a conversation. KG Supplies stocks ORAFOL in Phoenix with overnight delivery to Arizona, Nevada, New Mexico, and Colorado, plus nationwide UPS shipping. Call (602) 272-8655 or email Sales@kgsupplies.com.
