Metamark Frost is a self-adhesive vinyl film that replicates the appearance of acid-etched glass without the permanent alteration, hazardous chemicals, or high cost. It can be applied in minutes, removed if needed, and allows for precision-cut custom designs. Traditional acid etching is a permanent chemical process that's more expensive, time-consuming, and cannot be reversed or modified.

When properly applied to interior glass, Metamark Frost has a durability rating of 3 years under normal conditions. For exterior applications in vertical exposure under Northern European conditions, it also maintains a 3-year warranty. Actual lifespan may vary based on environmental factors and proper installation.

Metamark Frost provides privacy screening while maintaining 86% light transmission. You cannot see clear images or details through the film, but silhouettes and movement may be visible depending on lighting conditions. It allows natural light to pass through while obscuring visibility, making it ideal for office partitions and privacy applications.

Metamark Frost (M4-OF) is available in five widths: 380mm, 610mm, 760mm, 1220mm, and 1600mm, all in 50-meter roll lengths. The contrast liner version (M4-OF-C) is available in 610mm and 1220mm widths only. This range of widths accommodates projects from small decorative graphics to full wall-to-wall installations.

Yes, Metamark Frost is compatible with solvent, eco-solvent, latex, and UV inks, making it suitable for wide-format digital printing. This allows you to create custom branded graphics, decorative patterns, or combine frosted and clear areas for unique design effects. Always test print settings before production runs.

Both wet and dry application methods work with Metamark Frost. Wet application (using application fluid) is recommended for larger panels as it allows repositioning and helps eliminate air bubbles. Dry application works well for smaller decals and cut graphics. The permanent solvent-based adhesive is designed to work effectively with either method.

M4-OF-C is the same Metamark Frost film but features a contrast-colored liner instead of the standard kraft liner. The contrast liner makes it much easier to see your cut lines and weed out unwanted material when creating intricate designs or text. It's particularly useful for detailed computer-cut graphics and is available in 610mm and 1220mm widths.

Yes, despite being a permanent adhesive film, Metamark Frost can be removed cleanly from glass surfaces when proper removal techniques are used. Gentle heating and slow removal at a low angle typically results in clean removal without residue. This makes it ideal for temporary installations or when you want to update designs without permanent commitment.

While Metamark Frost is water-resistant and can handle humidity, it's important to note that constant direct water exposure (such as inside a shower) may affect long-term durability. It works excellently on bathroom windows, shower doors (exterior side), or bathroom partitions where it won't receive constant water spray. For high-moisture environments, ensure proper edge sealing and avoid areas with direct, prolonged water contact.

Metamark Frost is designed primarily for glass surfaces, where it performs best. It can also be applied to other smooth, non-porous surfaces like acrylic, polycarbonate, and some painted surfaces. It is NOT recommended for low-energy surfaces like polypropylene, application over rivets, complex recesses, or between two sheets of glass. Always test a small area first to ensure proper adhesion and appearance on your specific substrate.

Yes, Metamark Frost is commonly used for building regulations compliance in commercial settings where glass manifestation is required for safety. It has a Class B fire rating (BS EN 13501-1:2007/2018) and is REACH & RoHS compliant. When used for safety manifestation, ensure you follow local building codes regarding placement heights and coverage areas.

Measure the total area to be covered in square meters/feet. For full coverage, add 10-15% for waste and overlap. For cut graphics, account for spacing between designs and trimming. If covering multiple glass panels, consider the width of your panels versus available film widths to minimize seams. Our team can help you determine the most efficient width and quantity for your specific project.