Description
Material Overview
Add a higher-perceived value to designs with Soft Metallic heat transfer vinyl. This one-step application gives the look of foil with an incredibly soft feel.
- Easy to cut and weed
- Thin and stretchable
- Holds fine detail
- Low-temp application
- Compatible with our Stahls' Rip-Away Appliqué™ Process
Material Specifications
- Composition: Polyurethane
- Carrier: Pressure-Sensitive
- Thickness: 63 microns (.063 mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
- Important: Once handled or laundered, the material takes on a brushed metallic finish.
CAD-CUT® Soft Metallic Heat Transfer Vinyl
Application Instructions
1-Color Application Instructions
Time:
8-10 seconds
Temperature:
285°F/140°C
Pressure:
Medium
Peel:
Cold
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:
Care Instructions
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- Cotton/Poly Blends
