Product Description
Arlon DPF V9700 Premium Non-PVC Vehicle Wrap Film - 2 Mil Cast Polyurethane with FLITE Technology - Sustainable 12-Year Wrap Solution
Revolutionary Sustainable Vehicle Wrap Technology
Arlon DPF V9700 represents the future of vehicle wraps—combining premium performance with environmental responsibility. This groundbreaking 2-mil (50 micron) cast polyurethane film is manufactured using a water-based formulation that reduces VOC emissions by 57% compared to traditional PVC films, demonstrating Arlon's commitment to sustainability without compromising professional results. Featuring advanced FLITE Technology for effortless installation, exceptional repositionability, and clean removal, DPF V9700 delivers an industry-leading 12-year durability (unprinted) while maintaining superior conformability around complex curves, rivets, and deep channels. With enhanced structural stability that minimizes edge curling during heat application and resistance to mold growth when paired with Series V3370 overlaminate, this non-PVC film sets a new standard for fleet graphics, full vehicle wraps, and partial wraps where sustainability meets professional excellence.
VITAL™ Technology: Performance Meets Sustainability
What Makes V9700 Sustainable?
- Non-PVC Construction: Cast polyurethane (PU) film eliminates traditional PVC concerns
- Water-Based Manufacturing: Reduces VOC emissions by 57% during production
- Extended Lifespan: 12-year durability means fewer replacements and less waste
- Clean Removal: Removes cleanly at end-of-life, facilitating recycling
- No Mold Growth: Tested per ASTM D3273 when paired with V3370*
- Reduced Waste: High heat tolerance and stability minimize installation scrap
*No mold growth detected under ASTM D3273 when paired with Series V3370 overlaminate
Key Features
- Premium Non-PVC Film: Cast polyurethane construction for superior performance
- FLITE Technology®: Revolutionary air-egress for bubble-free installation
- 12-Year Extended Durability: Industry-leading lifespan (unprinted, vertical)
- High Heat Tolerance: Enhanced structural stability minimizes edge curling
- 57% VOC Reduction: Water-based formulation for sustainable manufacturing
- Superior Repositionability: Optimal initial tack for easy adjustment
- Clean Removal: Removes cleanly at end of wrap life
- 2-Mil Cast Film: Premium conformability for complex surfaces
- Print-to-Cut Capable: Designed for cutting letters 2" (5 cm) or greater
- Effortless Liner Release: FLITE Technology enables easy handling
- High Gloss Finish: ≥80 gloss units for premium appearance
- Universal Print Compatibility: Eco-Solvent, Solvent, UV, and Latex
FLITE Technology® Advantage
DPF V9700 features Arlon's revolutionary FLITE (Film Lite Technology) adhesive system that transforms the installation experience:
Effortless Liner Release
The low-profile FLITE liner releases smoothly without sticking or tearing, speeding up installation and reducing installer fatigue.
Superior Repositionability
Optimal initial tack allows multiple adjustments for perfect placement while building to a strong permanent bond.
Quick Snap-Up
Air channels enable quick snap-up technique for efficient installation on large panels and flat surfaces.
Bubble-Free Results
Low-profile air egress channels virtually eliminate bubbles during application for professional results every time.
Applications
Commercial Fleet Graphics
- Delivery van wraps
- Service vehicle branding
- Company car graphics
- Box truck wraps
- Utility vehicle markings
- Fleet-wide branding programs
Full Vehicle Wraps
- Complete vehicle transformations
- Color change wraps
- Advertising wraps
- Luxury vehicle customization
- Show car graphics
- Corporate branding
Partial Vehicle Wraps
- Hood and roof graphics
- Door panel branding
- Accent stripes and decals
- Window surround graphics
- Bumper and fender accents
- Sponsor logos and patches
Commercial Applications
- Transit vehicle advertising
- Municipal vehicle graphics
- Emergency vehicle striping
- Rental fleet wraps
- Ride-share branding
- Food truck graphics
Technical Specifications
| Film Type: | Premium Cast Polyurethane (Non-PVC) |
| Thickness: | 2 mil (50 micron) |
| Surface Finish: | High Gloss (≥80 gloss units) |
| Adhesive: | Clean Removing, Repositionable (Light Gray) |
| Release Liner: | Lay-flat polycoated with low-profile FLITE Technology® |
| Durability (Unprinted): | Zone 1: 12 years vertical / 6 years horizontal Zone 2: 10 years vertical / 5 years horizontal Zone 3: 8 years vertical / 4 years horizontal |
| Application Temperature: | 60°F to 90°F (16°C to 32°C) |
| Service Temperature: | -40°F to 175°F (-40°C to 79°C) |
| Tensile Strength: | ≥10.5 lb/in (≥1.88 kg/cm) |
| Elongation: | 260% |
| Peel Adhesion: | 2.75 lb/in (0.49 kg/cm) |
| Dimensional Stability: | 0.010 in (0.24 mm) after 158°F, 48 hours |
| Shelf Life: | 2 years from factory shipment |
| VOC Reduction: | 57% reduction vs. traditional PVC films |
? Durability by Climate Zone
| Climate Zone | Vertical Durability | Horizontal Durability | Typical Locations |
|---|---|---|---|
| Zone 1 | 12 Years | 6 Years | Northern climates, moderate conditions |
| Zone 2 | 10 Years | 5 Years | Mixed climate areas |
| Zone 3 | 8 Years | 4 Years | Extreme heat, high UV exposure, southern climates |
Unprinted film durability. Printed durability depends on ink system and environmental conditions.
Available Sizes
- 54" x 50 yards (1.37 m x 45.72 m)
- 60" x 50 yards (1.52 m x 45.72 m)
Print Compatibility
DPF V9700 delivers excellent print quality with all major ink systems:
- Eco-Solvent Inks: Vibrant colors with environmental benefits
- Solvent Inks: Superior outdoor durability
- UV Inks: Instant curing and brilliant finish
- Latex Inks: Eco-friendly printing with great results
⚠️ Required: Series V3370 Overlaminate
MUST Use Series V3370 Overlaminate
DPF V9700 must be overlaminated with Arlon Series V3370 for optimal performance and warranty coverage. The V3370 overlaminate provides:
- High-gloss finish retention for vibrant graphics
- UV protection for extended outdoor durability
- Scratch and abrasion resistance
- Chemical resistance against fuel, oils, cleaners
- Mold resistance when tested per ASTM D3273*
- Enhanced color stability over time
⚠️ Film not intended for use without overlaminate. Series V3370 is required for warranty coverage.
High Heat Tolerance Advantage
DPF V9700's enhanced structural stability provides significant benefits during installation:
- Minimal Edge Curling: Edges stay flat when heated, easier to work with
- Reduced Rework: Stable film means fewer installation errors
- Less Scrap: Minimizes wasted material from installation mistakes
- Time Savings: Faster installation without fighting curling edges
- Better Results: Professional appearance with clean seams and edges
- Installer Confidence: Predictable behavior during post-heating
Superior Conformability
As a premium 2-mil cast film, DPF V9700 excels in complex applications:
- Deep Channels: Conforms into recessed areas and body lines
- Rivets & Hardware: Wraps around protruding elements smoothly
- Complex Curves: Follows compound curves without distortion
- Mirror Housings: Conforms to rounded, complex shapes
- Door Handles: Wraps around hardware with minimal stress
- Bumpers: Adapts to complex contours and textures
*Arlon recommends the no-stretch/inside-first technique for optimal installation. Contact your local technical representative for training.
Print-to-Cut Capability
DPF V9700 is engineered for accurate cutting and weeding:
- Designed for Letters 2" (5 cm) or Greater: Clean cutting without tearing
- Precise Weeding: Film lifts cleanly from liner without stretching
- Consistent Results: Predictable cutting behavior across entire roll
- Sharp Details: Maintains edge definition in cut graphics
- Production Efficiency: Speeds up production of cut vinyl graphics
Recommended Installation: No-Stretch/Inside-First Method
For optimal results with DPF V9700, Arlon recommends the no-stretch/inside-first installation technique:
Key Principles:
- Minimize stretching of the film during application
- Start from inside curves and work outward
- Use FLITE repositionability to achieve proper placement
- Allow film to relax naturally into contours
- Post-heat to activate adhesive and ensure conformability
Training Available: Contact your local Arlon technical representative for hands-on training and installation support.
Clean Removal for End-of-Life
When it's time to remove or change the wrap:
- Film removes cleanly without excessive adhesive residue
- Repositionable adhesive system facilitates removal process
- Proper removal technique leaves vehicle surface intact
- Reduces labor time compared to traditional PVC wraps
- Enables vehicle refresh or return to original paint
Note: Clean removal performance assumes proper surface preparation and installation according to Arlon guidelines.
Important: Stainless Steel Applications
Special Considerations for Stainless Steel:
- DPF V9700 is suitable for smooth stainless steel surfaces
- Clean removability is NOT guaranteed on stainless steel
- Arlon does not warranty against discoloration or staining
- Staining may be visible after removal from stainless steel
- Always test on inconspicuous area before full application
Storage & Handling
- Store at 70°F (21°C) and 50% relative humidity
- Keep in original packaging until use
- Shelf life: 2 years from factory shipment
- Protect from direct sunlight and temperature extremes
- Allow material to acclimate before printing and installation
- Handle with clean, dry hands to avoid contamination
Environmental Impact & Sustainability
Reduced Manufacturing Emissions
Water-based formulation reduces VOC emissions by 57% during manufacturing compared to traditional PVC films.
Extended Product Life
12-year durability means wraps last longer, reducing the frequency of replacements and associated waste.
Non-PVC Alternative
Polyurethane construction eliminates concerns associated with traditional PVC vinyl production and disposal.
Reduced Installation Waste
High heat tolerance and structural stability minimize scrap material during installation, reducing waste.
Clean Removal
Removes cleanly at end-of-life, facilitating vehicle recycling and reducing adhesive residue concerns.
Mold Resistance
No mold growth detected when paired with V3370, promoting healthier indoor storage environments.
Product Highlights
- ✓ Premium non-PVC cast polyurethane film - sustainable alternative
- ✓ 57% VOC reduction - water-based manufacturing process
- ✓ 12-year extended durability - industry-leading lifespan (Zone 1 vertical)
- ✓ FLITE Technology® - effortless installation with superior repositionability
- ✓ High heat tolerance - minimal edge curling, reduced rework
- ✓ Clean removing - removes cleanly at end of wrap life
- ✓ 2-mil cast film - superior conformability for complex curves
- ✓ High gloss finish - ≥80 gloss units for premium appearance
- ✓ Print-to-cut capable - designed for letters 2" or greater
- ✓ No mold growth* - tested per ASTM D3273 with V3370
- ✓ Universal print compatibility - Eco-Solvent, Solvent, UV, Latex
- ✓ MUST use Series V3370 overlaminate for warranty coverage
Why Choose Non-PVC V9700?
| Feature | DPF V9700 (Non-PVC) | Traditional PVC Cast Films |
|---|---|---|
| Material | Polyurethane (PU) | PVC Vinyl |
| Manufacturing VOCs | 57% Reduction | Standard Levels |
| Durability (Vertical) | Up to 12 Years | Typically 7-10 Years |
| Heat Stability | High - Minimal Curling | Variable |
| Installation | FLITE Technology | Standard Air-Egress |
| Mold Resistance* | Yes (with V3370) | Not Specified |
| Environmental Impact | Lower | Higher |
| End-of-Life | Clean Removal | Variable |
*When paired with Series V3370 overlaminate
Frequently Asked Questions
Q: What makes DPF V9700 sustainable?
A: V9700 is cast from a water-based formulation that reduces VOC emissions by 57% during manufacturing compared to traditional PVC films. The non-PVC polyurethane construction eliminates concerns with traditional vinyl production, and the 12-year durability means fewer wrap replacements over time, reducing waste.
Q: Is V9700 as durable as PVC films?
A: V9700 actually exceeds most PVC films with up to 12 years vertical durability (unprinted) in Zone 1. This premium cast polyurethane film delivers professional performance without compromising on sustainability.
Q: What is FLITE Technology and why does it matter?
A: FLITE Technology is Arlon's proprietary adhesive system featuring low-profile air-egress channels and optimized initial tack. It provides effortless liner release, superior repositionability during installation, and enables quick snap-up technique for faster, easier installations with bubble-free results.
Q: Why is high heat tolerance important?
A: During vehicle wrap installation, film is heated for conformability. DPF V9700's enhanced structural stability minimizes edge curling when heated, reducing installation errors, material waste, and rework time—saving both money and resources.
Q: Must I use Series V3370 overlaminate?
A: Yes, DPF V9700 must be overlaminated with Series V3370 for warranty coverage and optimal performance. The overlaminate provides UV protection, gloss retention, scratch resistance, and enables the mold resistance benefit.
Q: What does "no mold growth" mean?
A: When DPF V9700 is paired with Series V3370 overlaminate, the system showed no mold growth when tested according to ASTM D3273. This is beneficial for vehicles stored in humid environments.
Q: Can I use this for print-and-cut decals?
A: Yes! V9700 is designed for cutting and weeding letters 2" (5 cm) or greater. The film cuts cleanly and weeds accurately for production of cut vinyl graphics and decals.
Q: What is the no-stretch/inside-first technique?
A: This is Arlon's recommended installation method for V9700 that minimizes film stretching and works from inside curves outward. This technique, combined with FLITE repositionability, achieves optimal results. Contact your Arlon technical rep for training.
Q: How do durability zones work?
A: Durability varies by climate zone. Zone 1 (northern, moderate climates) offers up to 12 years vertical. Zone 3 (extreme heat, high UV) offers 8 years vertical. This accounts for varying environmental stress across geographic regions.
Q: Can I wrap stainless steel with V9700?
A: V9700 can be applied to smooth stainless steel surfaces, but clean removability is not guaranteed. Arlon does not warranty against discoloration or staining that may occur after removal from stainless steel. Always test first.
Q: Is this easier to install than other wrap films?
A: Many installers find FLITE Technology makes installation faster and easier. The superior repositionability, effortless liner release, and high heat tolerance combine to reduce installation time and improve results.
Q: How does non-PVC compare to PVC vinyl?
A: Non-PVC polyurethane offers environmental advantages (lower VOC manufacturing), often superior durability, and excellent performance characteristics. It's the professional's choice when sustainability matters without compromising results.
Arlon Total System Warranty
When used with Series V3370 overlaminate and other compatible Arlon products, DPF V9700 is covered under the Arlon Total System Warranty for added confidence and protection.
