Product Description
Arlon DPF V9500 Premium Non-PVC Textured Wall Wrap Film - 2 Mil Polyurethane for Rough Surfaces - Paint-Like Finish on Brick, Block & Stucco
Revolutionary Textured Surface Solution
Arlon DPF V9500 represents a breakthrough in wall wrap technology—a premium 2-mil (50 micron) non-PVC polyurethane film specifically engineered to transform highly textured and irregular surfaces into stunning, vibrant canvases. Where traditional vinyl fails on rough surfaces like brick, concrete block, split-face block, and stucco, V9500 excels, delivering a paint-like finish that adheres securely without lifting, shrinking, or popping over time. The high-tack permanent adhesive system is specifically formulated for wall applications, providing optimal initial tack for repositionability during installation while building to a long-lasting ultimate bond. With 68% VOC reduction during manufacturing compared to PVC films, 10-year durability, and fire certification to ASTM E84, EN 13501, and AS 5637, DPF V9500 combines environmental responsibility with professional performance. Whether wrapping entire buildings, creating exterior murals, or installing interior graphics on textured walls, V9500 delivers exceptional conformability, effortless installation, and lasting impact where other films simply can't perform.
Engineered for Textured Surfaces
The Textured Surface Challenge
Traditional vinyl films struggle on rough, irregular surfaces. They bridge over textures, fail to conform into crevices, and eventually lift, pop, or fail. DPF V9500 solves these challenges with:
Exceptional Conformability
2-mil cast polyurethane conforms into deep textures, around irregularities, and into surface valleys for complete contact and a paint-like appearance.
High-Tack Adhesive
Specially formulated permanent adhesive (3.4 lbf/in) grips rough surfaces aggressively, preventing lifting and ensuring long-term bond even on challenging substrates.
Excellent Heat Reception
Film accepts heat readily, becoming pliable to conform into textures while maintaining structural integrity once cooled.
Air-Egress Technology
Low-profile air-egress liner helps eliminate trapped air even on irregular surfaces, ensuring complete adhesive contact.
Ideal Surface Types
Masonry & Brick
- Standard brick walls
- Exposed brick facades
- Painted brick surfaces
- Brick veneer
- Decorative brick patterns
Concrete Block
- Standard concrete block (CMU)
- Split-face block
- Ground-face block
- Painted block walls
- Textured concrete
Stucco & EIFS
- Traditional stucco finishes
- Synthetic stucco (EIFS)
- Textured stucco walls
- Smooth stucco surfaces
- Painted stucco exteriors
Other Rough Surfaces
- Textured painted walls
- Rough concrete surfaces
- Aggregate panels
- Tilt-up concrete walls
- Cast concrete facades
Note: DPF V9500 also works on smooth surfaces, making it versatile for mixed-texture applications.
Key Features
- Unmatched Conformability: Conforms to highly textured and irregular surfaces
- Paint-Like Finish: Delivers smooth, professional appearance on rough walls
- High-Tack Permanent Adhesive: 3.4 lbf/in secures to rough surfaces without lifting
- Optimal Initial Tack: Repositionable during installation for perfect placement
- Long-Term Bond: Builds to permanent adhesive that resists shrinking and popping
- 68% VOC Reduction: Sustainable non-PVC manufacturing process
- 10-Year Durability: Extended lifespan (unprinted film)
- Wide Temperature Range: 50°F to 95°F application range for hot and cold installs
- Excellent Heat Reception: Responds well to heat for conformability
- Fire Certified: ASTM E84, EN 13501, AS 5637 compliance
- Air-Egress Liner: Low-profile channels help eliminate bubbles
- Universal Print Compatibility: Eco-Solvent, Solvent, UV, Latex
VITAL™ Sustainable Technology
Environmental Leadership
- 68% VOC Reduction: Manufacturing process reduces emissions by 68% vs. PVC cast films
- Non-PVC Construction: Polyurethane formula eliminates traditional PVC concerns
- 10-Year Durability: Longer lifespan means fewer replacements and less waste
- Sustainable Solution: Performance without environmental compromise
Applications
Building Wraps
- Full building exterior wraps
- Multi-story building graphics
- Commercial building facades
- Retail building exteriors
- Parking structure wraps
- Warehouse building graphics
- Temporary construction wraps
Exterior Wall Graphics
- Outdoor murals on brick
- Building-scale artwork
- Brand identity on rough walls
- Advertising on textured surfaces
- Wayfinding on exterior walls
- Event graphics on buildings
- Urban beautification projects
Interior Wall Graphics
- Interior exposed brick murals
- Industrial interior décor
- Restaurant feature walls
- Retail interior branding
- Office exposed brick graphics
- Gym and fitness center walls
- Event venue decoration
Urban & Commercial
- Public art installations
- Municipal building graphics
- Sports facility exteriors
- Shopping center exteriors
- Hotel exterior branding
- Campus building graphics
- Transit facility walls
Technical Specifications
| Film Type: | Premium Cast Polyurethane (Non-PVC) |
| Thickness: | 2 mil (50 micron) |
| Surface Finish: | Gloss (>70 gloss units) |
| Adhesive: | Permanent, Repositionable (Tinted) |
| Release Liner: | Lay-flat polycoated with low-profile air-egress |
| Durability (Unprinted): | Up to 10 years |
| Textured Surface Performance: | 6-24 months outdoor (conditions-dependent)* |
| Application Temperature: | 50°F to 95°F (10°C to 35°C) |
| Service Temperature: | -40°F to 200°F (-20°C to 93.3°C) |
| Tensile Strength: | >13 lbf/in (>22.76 n/cm) |
| Elongation: | ≥300% |
| Peel Adhesion: | 3.4 lbf/in (5.95 n/cm) - High tack |
| Dimensional Stability: | 0.005 in (0.127 mm) after 158°F, 48 hours |
| Shelf Life: | 2 years from factory shipment |
| VOC Reduction: | 68% reduction vs. PVC cast films |
*Expected performance life for textured surface graphics of 6-24 months outdoor when not used in freezing and thawing cycles. Subject to the type of surface and its environmental conditions.
⚠️ Important: Textured Surface Durability
Understanding Performance on Textured Surfaces:
While DPF V9500 unprinted film is rated for 10 years durability on smooth surfaces, performance on highly textured surfaces varies based on conditions:
- Expected Outdoor Performance: 6-24 months on textured surfaces
- Freeze-Thaw Cycles: Can significantly reduce lifespan on rough surfaces
- Surface Type: Performance varies by texture depth and substrate type
- Environmental Conditions: UV exposure, moisture, temperature extremes affect longevity
- Proper Installation: Following recommended techniques maximizes performance
Recommendation: For critical long-term applications on textured surfaces, conduct test installations to verify expected performance in your specific environment.
Available Sizes
- 54" x 50 yards (1.37 m x 45.72 m)
Print Compatibility
HP Latex Ink Certified
DPF V9500 delivers excellent print quality on all major ink systems:
- Eco-Solvent Inks: Vibrant colors with environmental benefits
- Solvent Inks: Superior outdoor durability
- UV Inks: Instant curing and brilliant colors
- Latex Inks: Officially HP Latex certified for reliable performance
Compatible Overlaminate: Series V3370 Satin
Use with Series V3370 Satin Overlaminate
For optimal performance and protection, DPF V9500 is compatible with Arlon Series V3370 Satin overlaminate, which provides:
- UV protection for extended outdoor life
- Scratch and abrasion resistance
- Chemical resistance against environmental contaminants
- Satin finish for reduced glare on textured surfaces
- Enhanced color stability over time
Comprehensive Fire Safety Certification
DPF V9500 is certified to multiple international fire safety standards:
- ASTM E84: US fire safety standard for building materials
- EN 13501: European fire classification standard
- AS 5637: Australian fire safety standard
These certifications make V9500 suitable for:
- Commercial buildings and public spaces
- Healthcare facilities and hospitals
- Educational institutions
- Hotels and hospitality venues
- Government and municipal buildings
- High-rise building applications
Advanced Adhesive System
Optimal Initial Tack
The tinted permanent adhesive is engineered specifically for wall applications with optimal initial tack that enables:
- Repositionability during installation
- Adjustment for perfect alignment
- Bubble elimination on irregular surfaces
- Time to work the film into textures
High Ultimate Bond (3.4 lbf/in)
Over time, the adhesive builds to a strong permanent bond that:
- Resists lifting on rough surfaces
- Prevents shrinking over time
- Eliminates popping on textured walls
- Maintains secure bond for years
- Withstands environmental stress
Engineered for Textured Walls
Unlike standard vehicle wrap adhesives, V9500's formulation is specifically designed for the unique challenges of rough wall surfaces.
Installation Advantages
Wide Application Temperature Range
50°F to 95°F (10°C to 35°C) application range enables:
- Hot Weather Installs: Work confidently in warm conditions up to 95°F
- Cold Weather Installs: Install successfully in cooler temperatures down to 50°F
- Seasonal Flexibility: Year-round installation capability in most climates
- Reduced Scheduling Constraints: Less weather-dependent than films with narrow ranges
Excellent Heat Reception
- Film becomes pliable when heated
- Conforms readily into deep textures
- Maintains integrity during heat application
- Locks in place once cooled
- Professional finished appearance
Repositionable for Perfect Results
- Adjust position before final adhesion
- Align panels precisely
- Eliminate wrinkles and bubbles
- Work film into irregular areas
- Achieve professional results
Achieving a Paint-Like Finish
The hallmark of V9500 is its ability to deliver a paint-like finish on highly textured surfaces. This means:
- Complete Surface Coverage: Film conforms into every texture and valley
- No Bridging: Doesn't bridge over textures like rigid films
- Smooth Appearance: Graphics appear smooth despite rough substrate
- Professional Results: Finished look rivals painted murals
- Vibrant Graphics: Colors pop even on irregular surfaces
Installation Tips for Paint-Like Results:
- Properly prepare textured surface (clean, dry, sound)
- Apply heat generously to make film pliable
- Work film into textures with appropriate tools
- Use overlapping strokes to ensure complete contact
- Post-heat to lock film in place and enhance conformability
- Overlaminate for added protection and finish
Excellent Dimensional Stability
Minimal shrinkage (0.005 in / 0.127 mm) provides:
- Hot and Cold Installation: Stable across wide temperature range
- Panel Registration: Maintain alignment during multi-panel installs
- Seam Integrity: Seams stay aligned over time
- Professional Appearance: Graphics maintain registration for years
- Reduced Callbacks: Minimizes shrinkage-related failures
Surface Preparation for Textured Walls
Critical Preparation Steps:
- Clean Thoroughly: Remove all dirt, dust, chalking, and contaminants
- Repair Damage: Fill cracks, patch holes, stabilize loose material
- Test Adhesion: Conduct pull tests on actual substrate before full installation
- Check Paint Adhesion: Ensure painted surfaces have solid paint bond
- Seal If Necessary: Porous surfaces may benefit from sealing
- Verify Dryness: Ensure substrate is completely dry
Surface Must Be:
- Clean and free of contaminants
- Dry (no moisture intrusion)
- Sound (no loose material or friable surfaces)
- Compatible with high-tack adhesive
- Within proper temperature range during application
Storage & Handling
- Store at room temperature away from direct sunlight
- Keep in original packaging until use
- Shelf life: 2 years from factory shipment
- Protect from excessive moisture and temperature
- Allow material to acclimate before installation
- Handle printed material carefully to avoid damage
Product Highlights
- ✓ Unmatched conformability - engineered for highly textured surfaces
- ✓ Paint-like finish - professional appearance on rough walls
- ✓ High-tack adhesive (3.4 lbf/in) - secures to rough surfaces without lifting
- ✓ Repositionable - optimal initial tack for perfect placement
- ✓ 68% VOC reduction - sustainable non-PVC polyurethane
- ✓ 10-year durability - extended lifespan (unprinted on smooth surfaces)
- ✓ Wide temperature range - 50°F to 95°F for hot and cold installs
- ✓ Fire certified - ASTM E84, EN 13501, AS 5637 compliance
- ✓ Air-egress liner - helps eliminate bubbles on irregular surfaces
- ✓ Universal print compatibility - Eco-Solvent, Solvent, UV, Latex
- ✓ HP Latex certified - reliable performance on HP systems
- ✓ Excellent heat reception - conforms readily into textures
V9500 vs. Standard Wall Films
| Feature | DPF V9500 | Standard Vinyl Wall Films |
|---|---|---|
| Textured Surface Performance | Excellent - Engineered for rough walls | Poor - Bridges textures |
| Conformability | Exceptional - Paint-like finish | Limited - Lifts over time |
| Adhesive Strength | 3.4 lbf/in - High tack | Lower tack - May lift |
| Application Range | 50°F to 95°F | Typically narrower range |
| Material | Non-PVC Polyurethane | Usually PVC |
| VOC Manufacturing | 68% Reduction | Standard levels |
| Fire Certification | ASTM E84, EN 13501, AS 5637 | Varies |
| Best For | Brick, block, stucco, rough walls | Smooth surfaces only |
Frequently Asked Questions
Q: What surfaces can DPF V9500 be applied to?
A: V9500 is specifically engineered for highly textured and irregular surfaces including brick, concrete block, split-face block, stucco, rough concrete, and other textured walls. It also works on smooth surfaces, making it versatile for mixed applications.
Q: How is the durability different on textured vs. smooth surfaces?
A: The unprinted film is rated for 10 years on smooth surfaces. On highly textured outdoor surfaces, expected performance is 6-24 months depending on surface type, environmental conditions, and whether the installation experiences freeze-thaw cycles.
Q: What makes V9500 better than regular vinyl for textured surfaces?
A: V9500 has exceptional conformability to mold into deep textures, high-tack permanent adhesive (3.4 lbf/in) that grips rough surfaces, excellent heat reception for working into irregularities, and air-egress technology—all engineered specifically for challenging substrates where standard films fail.
Q: What does "paint-like finish" mean?
A: The film conforms so completely into textures and irregularities that the finished graphic appears as smooth as if it were painted on, despite the rough substrate underneath. There's no bridging or lifting—just complete coverage that looks professional.
Q: Can I install V9500 in cold weather?
A: Yes! V9500 has a wide application temperature range of 50°F to 95°F, making it suitable for both hot and cold weather installations. This gives you much more flexibility than films with narrow application ranges.
Q: Is overlaminate required?
A: While not absolutely required, overlaminating with Series V3370 Satin is recommended for optimal performance, especially for outdoor applications. The overlaminate provides UV protection, scratch resistance, and enhanced durability.
Q: What about freeze-thaw cycles?
A: Freeze-thaw cycles can significantly impact the performance life of graphics on textured surfaces. The expected 6-24 month performance is for installations not subjected to freeze-thaw cycles. In climates with freeze-thaw, performance may be reduced.
Q: How does the 68% VOC reduction compare to PVC films?
A: DPF V9500's non-PVC polyurethane manufacturing process reduces VOC emissions by 68% compared to traditional PVC cast films, making it a significantly more environmentally responsible choice without compromising performance.
Q: What fire certifications does V9500 have?
A: V9500 is certified to ASTM E84 (US), EN 13501 (Europe), and AS 5637 (Australia), making it suitable for commercial buildings, public spaces, healthcare facilities, educational institutions, and other applications requiring fire-rated materials.
Q: Why is the adhesive tinted?
A: The tinted adhesive helps mask substrate color variations that might otherwise show through on light-colored graphics. This is especially important on textured surfaces where substrate color can be inconsistent.
Q: How do I prepare a textured wall for installation?
A: Thoroughly clean to remove all contaminants, repair any damage, ensure the surface is sound and dry, check paint adhesion if applicable, and conduct test installations. Proper preparation is critical for successful long-term performance.
Q: Can V9500 be used for building wraps?
A: Absolutely! V9500 is ideal for building wraps on textured facades. Its conformability and high-tack adhesive make it perfect for wrapping entire buildings with brick, block, or stucco exteriors.
Arlon Total System Warranty
When used with Series V3370 overlaminate and other compatible Arlon products, DPF V9500 is covered under the Arlon Total System Warranty for added confidence.
