Product Description
ORAJET® 3751RA+PROSLIDE® Premium Cast Vehicle Wrap Film - Dual Technology: RapidAir® + ProSlide® - 2.25 Mil Professional Wrap Film - 8-Year Durability
The Ultimate Installer-Friendly Wrap Film
ORAJET® 3751RA+PROSLIDE® represents the pinnacle of installer-friendly vehicle wrap technology, combining two revolutionary innovations in a single premium film. This 2.25-mil cast PVC film features both ORAFOL's renowned RapidAir® air-egress technology AND ProSlide® optimized repositionability—creating an installation experience that dramatically reduces time, stress, and material waste while delivering exceptional professional results. The ProSlide® adhesive system features low initial tack that enables installers to easily position large panels and complex graphics with unprecedented control—slide the film into perfect alignment before committing to final placement, lift and reposition as needed without fighting aggressive adhesive, and achieve precise registration that would be nearly impossible with standard films. Once positioned correctly, the grey solvent polyacrylate adhesive builds to full strength while remaining removable with heat for up to 4 years from most well-conditioned OEM automotive paint systems. The RapidAir® technology transforms bubble elimination from a time-consuming challenge to an effortless process—microscopic air channels in the 88# PE-coated silicone liner allow trapped air to escape underneath the film, especially critical for large format panel applications and spot graphics where bubble-chasing can consume hours of installation time. The white gloss surface delivers superior printability with compatibility across latex, solvent, eco-solvent, and UV curable ink systems, while the grey adhesive provides excellent opacity to prevent substrate show-through on dark or multicolored vehicles. With exceptional dimensional stability (less than .004" shrinkage in length), outstanding temperature resistance (-58°F to +212°F), ASTM E 84-07 Class "A" fire rating, and 8-year unprinted durability, ORAJET® 3751RA+PROSLIDE® delivers professional-grade performance that justifies its position as a premium wrap film. Recommended for pairing with ORAGUARD® overlaminates (290, 290GF, 293 for standard applications; 289F for exceptional durability where rugged, self-healing protection is required), this film excels in long-term vehicle wrap applications, spot graphics, boat wrapping, and general signage requiring superior conformability and durability. Whether you're wrapping entire fleets, custom vehicles, or marine vessels, the combination of ProSlide® repositionability and RapidAir® bubble-free installation realizes significant time savings while delivering the flawless results that build your reputation and customer satisfaction.
ā” Dual Technology Advantage
Why ORAJET® 3751RA+PROSLIDE® stands above single-technology films:
ProSlide® Repositionability
Optimized low-initial-tack adhesive for easy positioning:
- Slide film into perfect alignment before final placement
- Lift and reposition without damaging film or substrate
- Precise control over large panels and complex graphics
- Reduced installer stress and faster completion
- Builds to full permanent strength after positioning
- Removable with heat up to 4 years for clean removal
RapidAir® Air-Egress
Bubble-free installation technology:
- Microscopic air channels allow trapped air to escape
- Effortless bubble elimination on large panels
- Critical for spot graphics and complex applications
- Dramatically reduces installation time
- Professional smooth finish without extensive squeegee work
- Consistent performance across entire graphic
The Synergy: ProSlide® lets you position perfectly, RapidAir® ensures bubble-free results—together they create the most installer-friendly wrap experience available.
Realize Significant Time Savings
The economic impact of dual technology on your wrap business:
Faster Positioning
ProSlide® low-initial-tack adhesive allows rapid positioning of large panels. What used to take 30+ minutes of careful placement now takes 5-10 minutes with confidence.
Minimal Bubble Work
RapidAir® eliminates hours of bubble-chasing. Air naturally escapes through channels—you squeegee once and you're done.
Fewer Mistakes
Repositionability means you can correct alignment errors. Reduce wasted panels from misalignment by 80% or more.
Reduced Labor Costs
Complete wraps in 30-40% less time compared to standard films. More jobs per week means better profitability.
Lower Material Waste
Repositionable + bubble-free = fewer ruined panels. Material savings add up quickly on large projects.
Customer Satisfaction
Faster turnaround times, flawless results, and competitive pricing keep customers coming back.
Grey Adhesive for Superior Opacity
Professional opacity that prevents substrate show-through:
- Grey Block-Out: Prevents vehicle paint from showing through white vinyl
- Consistent Color Accuracy: Graphics look identical on white, black, or multicolored vehicles
- No Shadowing: Clean, professional appearance without discoloration
- Substrate Independence: Predictable results regardless of underlying surface color
- Client Confidence: Consistent appearance across entire fleet
- Professional Standard: Grey adhesive is industry best practice for premium wraps
Key Features & Benefits
- 2.25 Mil Cast PVC: Premium cast construction for superior conformability
- White Gloss Surface: Professional high-gloss finish with excellent printability
- ProSlide® Technology: Optimized repositionability with low-initial-tack adhesive
- RapidAir® Technology: Air-egress for bubble-free installation
- Grey Solvent Polyacrylate Adhesive: Prevents show-through, repositionable
- Removable with Heat: Clean removal up to 4 years from OEM automotive paint
- 88# PE-Coated Silicone Liner: RapidAir® + ProSlide® enhanced liner
- Superior Dimensional Stability: <.004" length shrinkage
- Wide Temperature Range: -58°F to +212°F service temperature
- 8-Year Durability: Unprinted vertical applications
- ASTM E 84-07 Class "A": Fire rated for commercial installations
- Universal Print Compatibility: Latex, Solvent, Eco-Solvent, UV Curable
- ORAGUARD® Compatible: Works perfectly with ORAFOL overlaminates
- Premium Performance: Professional results with installer-friendly application
- 2-Year Shelf Life: Extended storage capability
Applications
Vehicle Wraps
- Complete vehicle wraps
- Color change wraps
- Custom graphics and designs
- Advertising wraps
- Racing graphics
- Luxury vehicle wraps
- Classic car graphics
- Show vehicle wraps
Spot Graphics
- Hood graphics
- Roof wraps
- Door panel graphics
- Fender accents
- Racing stripes
- Side graphics
- Bumper graphics
- Mirror wraps
Fleet Graphics
- Corporate fleet branding
- Delivery vehicle graphics
- Service fleet wraps
- Franchise vehicle branding
- Municipal fleet graphics
- Utility vehicle wraps
- Transportation fleet
- Emergency vehicle graphics
Marine Applications
- Boat hull graphics
- Yacht wraps and lettering
- Personal watercraft graphics
- Sailboat graphics
- Charter boat branding
- Racing boat graphics
- Marine vessel identification
- Marina fleet graphics
Commercial Applications
- Long-term outdoor signage
- Building wraps
- Column wraps
- Architectural graphics
- Dimensional signage
- Monument signs
- Kiosk graphics
- Curved surface signage
Specialty Applications
- Recreational vehicles
- Trailers and fifth wheels
- Food trucks
- Mobile businesses
- Event vehicles
- Promotional vehicles
- Box truck wraps
- Specialty vehicles
Technical Specifications
| Product Name: | ORAJET® 3751RA+PROSLIDE® |
| Manufacturer: | ORAFOL |
| Film Type: | Cast PVC |
| Thickness: | 2.25 mil (without liner and adhesive) |
| Finish: | White Gloss |
| Adhesive: | Grey Solvent Polyacrylate |
| Adhesive Characteristics: | Repositionable, Low-Initial-Tack, Removable with Heat |
| Adhesive Power: | 4.1 lb/in (adhered to stainless steel, 24h average) |
| Removability: | Clean removal up to 4 years (OEM automotive paint) |
| Release Liner: | 88# PE-Coated Silicone Paper |
| Technologies: | RapidAir® + ProSlide® |
| Dimensional Stability: | No shrinkage cross direction; <0.004" length |
| Temperature Resistance: | -58°F to +212°F (adhered to aluminum) |
| Fire Rating: | ASTM E 84-07 Class "A" (self-extinguishing) |
| Tensile Strength: | Min. 19 MPa (along and across) |
| Elongation at Break: | Min. 120% (along and across) |
| Seawaterability: | No variation after 100h/73°F (adhered to aluminum) |
| Shelf Life: | 2 years (68°F/50% relative humidity) |
| Durability: | 8 years (unprinted, vertical surfaces) |
| Min Application Temp: | 50°F |
| Print Compatibility: | Latex, Solvent, Eco-Solvent, UV Curable |
Available Sizes
Roll Widths (inches)
- 30" - Compact width for smaller projects
- 50" - Mid-range width for versatility
- 54" - Industry standard width
- 60" - Wide format for maximum coverage
Roll Lengths
- 150 feet (50-yard) - Standard production rolls
- 75 feet (25-yard) - Perfect for smaller projects or testing
Recommended ORAGUARD® Overlaminates
ORAJET® 3751RA+PROSLIDE® is specifically designed to work with ORAFOL ORAGUARD® overlaminates:
Standard Applications
- ORAGUARD® 290: Premium gloss overlaminate for automotive and boat wraps
- ORAGUARD® 290GF: Gloss finish for general graphics and signage
- ORAGUARD® 293: Matte overlaminate for sophisticated finish
Exceptional Durability Applications
- ORAGUARD® 289F: Rugged, self-healing overlaminate for extreme durability where maximum protection is required
Using ORAFOL overlaminates ensures optimal adhesion, appearance, warranty coverage, and extended outdoor life. ICC profiles available at www.orafol.com.
Print Compatibility
ORAJET® 3751RA+PROSLIDE® delivers excellent results with all major ink systems:
Latex Inks
- Water-based, environmentally friendly
- Odorless prints, no outgassing
- Immediate handling after printing
- Excellent scratch resistance
Solvent & Eco-Solvent Inks
- Excellent adhesion and durability
- Vibrant color reproduction
- Allow 24-48 hours drying (48-72 preferred)
- Dry completely before laminating
UV Curable Inks
- Instant curing for immediate handling
- Superior scratch and abrasion resistance
- Brilliant color reproduction
- Excellent outdoor durability
Best Practices
- ICC Profiles: Download ORAFOL ICC profiles at www.orafol.com for optimal print results
- Solvent Ink Drying: Allow at least 24 hours drying at 70°F (48-72 hours preferred) before cutting or laminating
- Test Prints: Always run test prints to verify color accuracy and ink adhesion
- Surface Preparation: Ensure media is clean and dust-free before printing
Installation Guidelines
Surface Preparation
- Thoroughly clean surfaces to remove dust, grease, wax, and contaminants
- Use appropriate automotive cleaner or isopropyl alcohol
- Freshly lacquered/painted surfaces must be completely cured
- Test compatibility of lacquers and paints before application
- Surface temperature should be at least 50°F
- Ensure surface is completely dry
Leveraging ProSlide® Technology
- Low Initial Tack Advantage: Take time to position large panels precisely—no rush
- Slide into Position: Film slides easily across surface for perfect alignment
- Reposition as Needed: Lift and adjust without damaging film or substrate
- Reduced Application Fluid: ProSlide® requires less slip solution than standard films
- Final Placement: Once positioned, apply firm squeegee pressure to initiate bond
- Adhesive Build Time: Adhesive reaches full strength over 24-48 hours
Leveraging RapidAir® Technology
- Air channels allow natural air evacuation during application
- Use overlapping squeegee strokes from center outward
- Firm, consistent pressure ensures complete adhesion
- Don't over-work the film—let RapidAir® do the work
- Small bubbles typically disappear within 24 hours
- Dramatically faster than non-air-egress films
Complex Curves & Deep Recesses
- Use heat (heat gun or torch) to enhance conformability
- Heat film to approximately 180-200°F for optimal stretching
- Apply with firm pressure while heated
- Post-heat all stress points, edges, and complex curves
- Work in sections, allowing film to cool between areas
- Cast construction conforms beautifully to compound curves
Critical Post-Installation Steps
- Edge Sealing: Seal all edges, seams, and overlaps with primer or edge sealer
- Post-Heating: Post-heat all edges, rivets, recesses, and high-stress areas
- Final Inspection: Check entire installation for proper adhesion
- Cure Time: Allow 24-48 hours for adhesive to reach full bond strength
- Avoid Washing: Do not wash vehicle for 48 hours after installation
- Customer Education: Provide care instructions for longevity
Removal Guidelines
Removable with heat up to 4 years from most well-conditioned OEM automotive paint systems:
- Heat Application: Use heat gun to warm film to approximately 160-180°F
- Start at Edge: Begin at any edge or corner and gently lift
- Low Angle Removal: Pull back at 45-90° angle while applying heat
- Even Pace: Maintain steady pull speed—not too fast or too slow
- Continue Heating: Keep applying heat as you pull to maintain adhesive temperature
- Work in Sections: For large panels, remove in manageable sections
- Residue Removal: Use adhesive remover for any remaining residue
Note: Clean removability depends on paint condition, curing time, environmental exposure, and proper removal technique. Always test on a small area first.
8-Year Durability
Expected Lifespan
- 8 Years: Unprinted film on vertical surfaces
- Extended with Overlaminate: ORAGUARD® overlaminates significantly extend outdoor life
- Application-Dependent: Lifespan varies based on use and environment
Factors Affecting Durability
- Geographic Location: Climate zone and UV exposure intensity
- Environmental Conditions: Harsh weather reduces life expectancy
- Surface Orientation: Vertical lasts longer than horizontal
- Maintenance: Regular washing and care extends graphic life
- Overlamination: Critical for maximum outdoor durability
- UV Exposure: Garaged vehicles vs. constant sun exposure
- Installation Quality: Proper technique ensures full durability
Performance Characteristics
- Superior cast film conformability
- Excellent dimensional stability (<.004" shrinkage)
- Resistant to fading and color degradation
- Withstands temperature extremes (-58°F to +212°F)
- Seawater resistant for marine applications
Product Highlights
- ā Dual technology - ProSlide® repositionability + RapidAir® air-egress
- ā 2.25 mil premium cast vinyl - superior conformability
- ā Low-initial-tack adhesive - easy positioning and slideability
- ā Grey adhesive - prevents substrate show-through
- ā Removable with heat up to 4 years - clean removal from OEM paint
- ā Bubble-free installation - RapidAir® technology saves hours
- ā 8-year durability - long-term unprinted performance
- ā Exceptional dimensional stability - <.004" length shrinkage
- ā Wide temperature range - -58°F to +212°F
- ā Fire rated - ASTM E 84-07 Class "A"
- ā Universal print compatibility - Latex, Solvent, Eco-Solvent, UV
- ā ORAGUARD® compatible - perfect pairing with ORAFOL overlaminates
Technology Comparison
| Feature | 3751RA+PROSLIDE® (Both) | Standard Cast Wrap |
|---|---|---|
| Repositionability | Yes - ProSlide® optimized | Limited or none |
| Air-Egress | Yes - RapidAir® technology | Varies |
| Initial Tack | Low (slideability) | Standard (immediate grab) |
| Installation Time | 30-40% faster | Standard |
| Bubble Elimination | Effortless (RapidAir®) | Time-consuming |
| Material Waste | Minimal (repositionable) | Higher |
| Adhesive Color | Grey (opacity) | Varies |
| Removability | Up to 4 years with heat | Varies (often permanent) |
| Dimensional Stability | <.004" (superior) | Varies |
| Durability | 8 years | 5-8 years typical |
Frequently Asked Questions
Q: What's the difference between RapidAir® and ProSlide® technologies?
A: RapidAir® is the air-egress technology—microscopic channels that allow trapped air to escape for bubble-free installation. ProSlide® is the optimized repositionable adhesive with low initial tack that allows you to slide and position the film easily. Together, they create the ultimate installer-friendly experience: easy positioning AND bubble-free results.
Q: How does ProSlide® repositionability work?
A: The low-initial-tack adhesive allows the film to slide across the surface during positioning and be lifted and repositioned as needed. This gives you time to achieve perfect alignment before the adhesive builds to full strength over 24-48 hours. It's especially valuable for large panels where getting it perfect on the first try is challenging.
Q: Can I really remove this film after 4 years?
A: Yes, with heat application! ORAJET® 3751RA+PROSLIDE® is designed to cleanly remove up to 4 years from most well-conditioned OEM automotive paint systems when proper heat removal technique is used. This makes it ideal for lease vehicles, temporary campaigns, or customers who want flexibility to update graphics.
Q: Why is grey adhesive important?
A: Grey adhesive prevents the vehicle's underlying paint color from showing through the white vinyl, ensuring consistent color accuracy and professional appearance regardless of substrate color. Your graphics will look identical whether applied to white, black, red, or multicolored vehicles.
Q: How much time does dual technology really save?
A: Installers report 30-40% time savings compared to standard wrap films. The combination of easy positioning (ProSlide®) and effortless bubble elimination (RapidAir®) means you spend less time on each vehicle while achieving better results. On a full vehicle wrap, this can mean 2-3 hours saved or more.
Q: What overlaminates should I use?
A: For automotive and boat wraps or long-term signage, use ORAGUARD® 290, 290GF, or 293. For exceptional durability where rugged, self-healing protection is required, use ORAGUARD® 289F. Using ORAFOL overlaminates ensures optimal adhesion, appearance, and warranty coverage.
Q: Can I use this on boats?
A: Absolutely! ORAJET® 3751RA+PROSLIDE® is specifically recommended for boat wrapping applications. The seawaterability (no variation after 100h/73°F) and conformability make it excellent for marine vessels. Always use appropriate ORAGUARD® overlaminate for marine environments.
Q: What printers is this compatible with?
A: ORAJET® 3751RA+PROSLIDE® is compatible with latex, solvent, eco-solvent, and UV curable inkjet printers. Download ICC profiles from www.orafol.com for optimal print results. Allow solvent-based inks to dry 24-48 hours (48-72 preferred) before cutting or laminating.
Q: How does dimensional stability compare to other films?
A: At <.004" shrinkage in length, ORAJET® 3751RA+PROSLIDE® offers exceptional dimensional stability—critical for multi-color designs and precise graphics that must stay aligned over years. This is significantly better than calendered films and competitive with the best cast films.
Q: What's the minimum application temperature?
A: 50°F is the minimum application temperature. For best results, work in controlled environments between 60-80°F. Cold temperatures can affect adhesive performance and film conformability.
Q: Does repositionability affect long-term bond strength?
A: No! The ProSlide® adhesive has low initial tack for easy positioning, then builds to full strength over 24-48 hours. Once cured, it provides strong, durable adhesion for the life of the graphic (while remaining removable with heat up to 4 years).
Q: How soon can the vehicle be washed?
A: Wait at least 48 hours after installation to allow adhesive to reach full bond strength. After curing, hand washing is recommended over automatic car washes for longest graphic life. Avoid high-pressure washers directly on edges.
ICC Profiles & Technical Support
ORAFOL provides comprehensive support for ORAJET® 3751RA+PROSLIDE®:
- ICC Profiles: Download at www.orafol.com for optimal print results with your specific printer/ink combination
- Technical Data Sheets: Complete specifications and recommendations
- Processing Instructions: Detailed installation and handling guidelines
- Technical Support: Expert assistance for questions and troubleshooting
- Email: techsupport-americas@orafol.com
- Website: www.orafol.com
Quality Assurance & Important Information
All ORAJET® products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning ORAJET® products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of ORAJET® products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use.
Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect adhesion. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user prior to application. Films with structured surface are naturally more sensitive than unstructured films and require more careful treatment in processing and cleaning.
California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
All specifications are subject to change without prior notice.
