Product Description
Mactac Gruv™ Slideable Cast Wrap - 2.0 Mil Premium Vehicle Wrap Film with Slideable Repositionable Adhesive - Air-Egress Technology - 10-Year Durability
Get into the Gruv - Outstanding Performance at Exceptional Value
Mactac Gruv™ Slideable Cast Wrap revolutionizes vehicle wrap installation by combining professional-grade performance with installer-friendly features at an exceptional value. This premium 2.0-mil gloss white cast vinyl film is specifically designed for speed and ease of application, featuring innovative slideable and repositionable adhesive technology that transforms the wrapping experience. The game-changing slideable adhesive system allows installers to position graphics precisely before committing to final placement—dramatically reducing installation time, minimizing mistakes, and eliminating the stress of getting it perfect on the first try. The permanent gray block-out acrylic adhesive features low initial tack for slideability during positioning, then builds to full permanent bond strength for long-term durability. A special primer enhances adhesive anchorage to the film, ensuring clean removability when it's time to update graphics. The highly conformable cast construction offers superior performance on complex curves, deep recesses, and riveted surfaces—handling the challenging contours of modern vehicle designs with ease. The 90# polycoated micro-channel air-egress liner is engineering excellence in action: microscopic channels imparted into the adhesive allow trapped air to escape during installation for bubble-free results, while the precision engineering ensures these channels never show through the finished graphic. Compatible with wide-format solvent, latex, and UV-curable inkjet printers, plus sheetable for UV offset and screen printing, Gruv™ Slideable integrates seamlessly into any production workflow. With up to 10-year durability for unprinted vertical applications, compatibility with Mactac Rayzor™ overlaminates, and coverage under the Mactac Open Image Warrantyâ„ , this film delivers professional results with the confidence of industry-leading support. Whether you're wrapping entire fleets, individual vehicles, buses, recreational vehicles, watercraft, or trailers—or creating long-term outdoor signage requiring conformability and durability—Gruv™ Slideable Cast Wrap stands out by delivering outstanding performance at an exceptional value. Made in USA (Spartanburg, SC).
Micro-Channel Air-Egress Technology
Engineered for bubble-free perfection without visual compromise:
- Micro-Channels in Adhesive: Microscopic air-release channels imparted directly into the adhesive layer
- Bubble-Free Installation: Trapped air escapes through channels during application—effortless bubble elimination
- Invisible Channels: Precision engineering ensures channels never show through the film surface
- 90# Polycoated Liner: Heavy-duty liner maintains dimensional stability during handling and installation
- Professional Results: Smooth, flawless finish every time without extensive bubble-chasing
- Time Savings: Spend less time working out bubbles, more time completing wraps
- Consistent Performance: Reliable air egress across entire graphic—no dead spots or problem areas
The combination of slideable adhesive AND air-egress technology makes Gruv™ one of the most installer-friendly wrap films available.
Gray Block-Out Adhesive
Professional opacity for superior graphic coverage:
- Gray Block-Out Layer: Prevents substrate show-through on dark or multicolored vehicles
- Enhanced Opacity: White film + gray adhesive = superior opacity and color accuracy
- Color Consistency: Graphics appear the same on any vehicle color—white, black, or multicolored
- Professional Appearance: No shadowing or discoloration from underlying paint
- Substrate Independence: Achieve consistent results regardless of vehicle color
- Client Confidence: Predictable results build customer trust and satisfaction
Key Features & Benefits
- 2.0 Mil Cast Vinyl: Premium cast construction for superior conformability
- Gloss White Finish: Professional high-gloss appearance
- Slideable & Repositionable: Low initial tack for easy positioning
- Permanent Gray Block-Out Adhesive: Builds to full strength, prevents show-through
- Micro-Channel Air-Egress: Bubble-free installation without visible channels
- 90# Polycoated Liner: Dimensional stability during handling
- Primer Enhanced: Better adhesive anchorage for clean removability
- Superior Conformability: Handles complex curves, recesses, rivets
- 10-Year Durability: Long-term performance (unprinted, vertical)
- Wide Print Compatibility: Solvent, Latex, UV, UV Offset, Screen
- Sheetable: Can be sheeted for UV offset and screen printing
- Rayzor™ Compatible: Works perfectly with Mactac Rayzor overlaminates
- Open Image Warranty: Covered by Mactac Open Image Warrantyâ„
- Made in USA: Manufactured in Spartanburg, South Carolina
- Exceptional Value: Professional performance at competitive pricing
Applications
Full Vehicle Wraps
- Complete car wraps
- Truck wraps
- Van wraps
- SUV wraps
- Sports car wraps
- Luxury vehicle wraps
- Color change wraps
- Custom vehicle graphics
Partial Wraps
- Hood graphics
- Roof wraps
- Door graphics
- Fender accents
- Racing stripes
- Side panel graphics
- Bumper graphics
- Window surrounds
Fleet Graphics
- Delivery fleet branding
- Service vehicle graphics
- Corporate fleet wraps
- Franchise vehicle branding
- Municipal fleet graphics
- Utility vehicle wraps
- Emergency vehicle graphics
- Transportation fleet branding
Large Vehicles
- Bus wraps (transit, school, tour)
- Recreational vehicle graphics
- Motorhome wraps
- Camper graphics
- Food truck wraps
- Mobile business graphics
- Box truck wraps
- Trailer graphics
Watercraft
- Boat hull graphics
- Yacht graphics and lettering
- Personal watercraft wraps
- Sailboat graphics
- Marine vessel identification
- Charter boat branding
- Racing boat graphics
- Marina fleet graphics
Signage Applications
- Long-term outdoor signage
- Dimensional signage
- Building wraps
- Column wraps
- Kiosk graphics
- Monument signs
- Architectural graphics
- Curved surface signage
Technical Specifications
| Product Name: | Gruv™ Slideable Cast Wrap |
| Manufacturer: | Mactac (Morgan Adhesives Company, LLC) |
| Film Type: | Cast PVC |
| Thickness: | 2.0 mil |
| Finish: | Gloss White |
| Adhesive: | Permanent Gray Block-Out Acrylic |
| Adhesive Characteristics: | Low Initial Tack, Slideable & Repositionable |
| Primer: | Yes (enhances anchorage for clean removability) |
| Release Liner: | 90# Polycoated Micro-Channel Air-Egress |
| Air-Egress: | Yes - Micro-channels in adhesive |
| Conformability: | Superior (complex curves, recesses, rivets) |
| Durability: | Up to 10 years (unprinted, vertical) |
| Print Compatibility: | Solvent, Latex, UV-Curable Inkjet, UV Offset, Screen |
| Sheetable: | Yes (for UV offset and screen printing) |
| Warranty: | Covered by Mactac Open Image Warrantyâ„ |
| Made In: | USA (Spartanburg, South Carolina) |
Available Sizes
Standard Roll Sizes
| SKU | Width | Length | Applications |
|---|---|---|---|
| GV1029SW54L150 | 54 inches | 150 feet | Full wraps, partial wraps, flat surfaces, simple curves, long-term signage |
| GV1029SW60L150 | 60 inches | 150 feet | Full wraps, partial wraps, flat surfaces, simple curves, long-term signage |
Recommended Overlaminates
Mactac Gruv™ Slideable is specifically designed to work with Mactac Rayzor™ overlaminates:
- Rayzor™ LF3648: Optically Clear Gloss Overlaminate
- Rayzor™ LF3648G: Clear Gloss Overlaminate
- Rayzor™ LF3638: Matte Overlaminate
Using Mactac Rayzor overlaminates ensures optimal adhesion, appearance, and warranty coverage. ICC profiles available at mactac.com.
Print Compatibility
Gruv™ Slideable Cast Wrap is compatible with all major printing technologies:
Wide Format Digital
- Solvent Inks: Excellent adhesion and durability
- Eco-Solvent Inks: Environmentally friendly with great results
- Latex Inks: Water-based, odorless, immediate handling
- UV-Curable Inks: Instant cure, superior scratch resistance
Traditional Printing
- UV Offset: Can be sheeted for high-volume production
- Screen Printing: Sheetable for bold, vibrant graphics
ICC Profiles: Download ICC profiles for optimal print results at mactac.com
Installation Guidelines
Surface Preparation
- Thoroughly clean all surfaces to remove dirt, grease, wax, and contaminants
- Use appropriate automotive cleaner or isopropyl alcohol
- Ensure surface is completely dry before application
- Surface temperature should be between 60°F and 90°F
- Allow freshly painted surfaces to cure completely (30+ days recommended)
Leveraging Slideable Technology
- Position First: Take advantage of slideability to position graphics precisely before final placement
- Use Tack Solution Sparingly: Slideable adhesive requires less application fluid than traditional films
- Adjust as Needed: Lift and reposition during installation to achieve perfect alignment
- Final Placement: Once positioned correctly, apply firm squeegee pressure to initiate bond
- Allow Time to Build: Adhesive builds to full strength over 24-48 hours
Air-Egress Installation
- Micro-channels allow air to escape naturally during application
- Use overlapping squeegee strokes from center outward
- Firm, consistent pressure ensures complete adhesion
- Air bubbles will evacuate through channels—don't over-work the film
- Small remaining bubbles typically disappear within 24 hours
Working with Complex Curves
- Use heat (heat gun or torch) to enhance conformability on curves
- Heat film to approximately 180-200°F for optimal stretching
- Apply with firm pressure while heated
- Post-heat all stress points, edges, and complex curves
- Allow film to cool completely before moving vehicle
Critical Post-Installation Steps
- Edge Sealing: Seal all edges, seams, and overlaps with primer or edge sealer
- Post-Heating: Post-heat all edges, rivets, recesses, and high-stress areas
- Final Inspection: Check entire installation for proper adhesion and conformity
- Cure Time: Allow 24-48 hours for adhesive to reach full bond strength
- Avoid Car Washes: Do not wash vehicle for 48 hours after installation
Durability & Performance
Expected Life Span
- Up to 10 Years: Unprinted film, no overlaminate, vertical flat surface
- With Overlaminate: Extended life and enhanced UV protection
- Use-Life Basis: Based on accelerated age studies under "normal" environmental conditions
Factors Affecting Durability
- Environmental Conditions: Severe weather reduces life expectancy
- UV Exposure: Constant direct sunlight vs. garaged vehicles
- Geographic Location: Climate zone and weather patterns
- Maintenance: Regular washing and care extends graphic life
- Surface Orientation: Vertical surfaces last longer than horizontal
- Overlamination: Significantly extends outdoor durability
Performance Characteristics
- Superior conformability on complex curves and deep recesses
- Excellent performance on riveted surfaces
- Clean removability with proper removal technique
- Minimal shrinkage and dimensional stability
- Resistant to fading and color degradation
Mactac Open Image Warrantyâ„
Gruv™ Slideable Cast Wrap is covered by the industry-leading Mactac Open Image Warrantyâ„
- Comprehensive Coverage: Protection against material defects and performance issues
- Industry Recognition: Mactac's reputation for standing behind their products
- Professional Peace of Mind: Confidence in material performance for you and your customers
- Support Network: Technical assistance and support when needed
Refer to Mactac Product Performance Guides and Technical Assistance Bulletins for complete warranty details and installation requirements. Visit mactac.com for documentation.
Proudly Made in USA
Produced in Spartanburg, South Carolina
- American Manufacturing: Supporting US jobs and economy
- Quality Control: Stringent manufacturing standards and testing
- Reliable Supply Chain: Consistent availability and delivery
- Local Support: US-based technical support and customer service
- Environmental Standards: Compliance with US environmental regulations
Product Highlights
- âś“ Slideable & repositionable adhesive - easy positioning, fewer mistakes
- âś“ Micro-channel air-egress technology - bubble-free installation
- âś“ 2.0 mil premium cast vinyl - superior conformability
- âś“ Gray block-out adhesive - prevents substrate show-through
- âś“ 10-year durability - long-term performance
- âś“ Superior conformability - handles complex curves, recesses, rivets
- âś“ Primer enhanced - clean removability
- âś“ Wide print compatibility - Solvent, Latex, UV, UV Offset, Screen
- âś“ Sheetable for traditional printing - UV offset and screen
- âś“ Rayzor compatible - works perfectly with Mactac overlaminates
- âś“ Mactac Open Image Warrantyâ„ - industry-leading coverage
- âś“ Made in USA - Spartanburg, South Carolina
Gruv™ Slideable vs. Standard Cast Wrap Films
| Feature | Gruv™ Slideable | Standard Cast Wrap |
|---|---|---|
| Adhesive Type | Slideable & Repositionable | Standard Permanent |
| Initial Tack | Low (for easy positioning) | Immediate (harder to adjust) |
| Repositionability | Yes - lift and reposition | Limited or none |
| Installation Time | Faster (less stress, easier alignment) | Slower (must get it right first time) |
| Air-Egress | Micro-channel technology | Varies by product |
| Block-Out Adhesive | Gray (superior opacity) | Clear or gray varies |
| Installer Friendly | Very (slideable + air egress) | Moderate |
| Material Waste | Lower (repositionable reduces errors) | Higher (mistakes costly) |
| Durability | Up to 10 years | Varies (7-10 years typical) |
| Value | Exceptional (professional performance, competitive price) | Standard market pricing |
Frequently Asked Questions
Q: What makes Gruv™ Slideable different from standard wrap films?
A: The revolutionary slideable and repositionable adhesive system. Low initial tack allows you to position graphics precisely, slide them into perfect alignment, and even lift and reposition during installation—then the adhesive builds to full permanent strength. Combined with micro-channel air-egress technology, it's one of the most installer-friendly wrap films available.
Q: How does slideable adhesive work?
A: The adhesive is formulated with low initial tack, allowing the graphic to slide across the surface during positioning. This gives you time to achieve perfect alignment before the adhesive begins to build bond strength. Once positioned correctly and squeegeed firmly, the adhesive cures to full permanent strength over 24-48 hours.
Q: Can I really lift and reposition during installation?
A: Yes! The repositionable nature of the adhesive allows you to gently lift and reposition graphics during installation to correct alignment. This is especially valuable on large panels or complex installations where getting it perfect on the first try is challenging. However, work deliberately—excessive repositioning can affect final adhesion.
Q: What are micro-channels and why don't they show?
A: Micro-channels are microscopic pathways imparted into the adhesive layer that allow trapped air to escape during installation. They're engineered at a scale small enough to effectively release air but invisible to the eye through the film. This precision engineering delivers bubble-free results without compromising the finished appearance.
Q: Why is gray block-out adhesive important?
A: Gray block-out adhesive prevents the vehicle's underlying paint color from showing through the white vinyl. This ensures consistent color accuracy and professional appearance regardless of whether you're wrapping a white, black, or multicolored vehicle. Your graphics will look the same on every vehicle color.
Q: Can Gruv™ Slideable handle complex curves?
A: Absolutely! The 2.0-mil premium cast construction provides superior conformability for complex curves, deep recesses, and riveted surfaces. With heat application, it conforms beautifully to challenging vehicle contours that would be difficult or impossible with calendered films.
Q: How long does Gruv™ Slideable last?
A: Up to 10 years for unprinted film without overlaminate on vertical flat surfaces under normal environmental conditions. Actual lifespan depends on geographic location, UV exposure, maintenance, and whether overlaminate is used. Using Mactac Rayzor overlaminates significantly extends outdoor durability.
Q: What overlaminates should I use?
A: Gruv™ Slideable is specifically designed to work with Mactac Rayzor™ overlaminates: LF3648 (Optically Clear Gloss), LF3648G (Clear Gloss), and LF3638 (Matte). Using Mactac overlaminates ensures optimal adhesion, appearance, and warranty coverage.
Q: What printers is Gruv™ Slideable compatible with?
A: Gruv™ Slideable is compatible with wide-format solvent, eco-solvent, latex, and UV-curable inkjet printers. It can also be sheeted for UV offset and screen printing. ICC profiles are available at mactac.com for optimal print results.
Q: Is Gruv™ Slideable covered under warranty?
A: Yes! Gruv™ Slideable is covered by the Mactac Open Image Warrantyâ„ . Refer to Mactac Product Performance Guides and Technical Assistance Bulletins at mactac.com for complete warranty details and installation requirements.
Q: What's the difference between 54" and 60" widths?
A: Both widths offer the same film characteristics and performance. Choose based on your typical vehicle sizes and printing equipment capabilities. The 60" width provides more coverage for larger vehicles and reduces the number of seams required.
Q: How soon can the vehicle be washed after installation?
A: Wait at least 48 hours after installation before washing to allow the adhesive to reach full bond strength. After the curing period, normal washing is safe—hand washing is recommended over automatic car washes for longest graphic life.
Q: Does slideability affect long-term bond strength?
A: No! The slideable adhesive is formulated to have low initial tack for easy positioning, then build to full permanent bond strength over 24-48 hours. Once cured, it provides the same long-term performance as traditional permanent adhesives.
Q: Where is Gruv™ Slideable manufactured?
A: Gruv™ Slideable is proudly manufactured in the USA in Spartanburg, South Carolina, ensuring consistent quality, reliable supply, and supporting American jobs.
Support & Resources
Mactac provides comprehensive support for Gruv™ Slideable Cast Wrap:
- ICC Profiles: Download at mactac.com for optimal print results
- Product Performance Guides: Detailed specifications and recommendations
- Technical Assistance Bulletins: Installation guidelines and troubleshooting
- Customer Service: 800-321-8834
- Email Support: Mactac.Americas@mactac.com
- Website: mactac.com/graphics
Important Information
Recommendations and Performance: Durability and use-life estimates are based on accelerated age studies on vertical applications under "normal" environmental conditions. Severe environmental conditions will reduce life expectancy. Recommendations are believed to be accurate but do not constitute a warranty written or implied. Refer to Mactac® Product Performance Guides and Technical Assistance Bulletins prior to use. Visit mactac.com to download.
Warranty Coverage: Gruv™ Slideable Cast Wrap is covered by Mactac Open Image Warrantyâ„ . Complete warranty terms, conditions, and installation requirements are available in Product Performance Guides at mactac.com.
Technical Support: For questions about Gruv™ or other Mactac products, partnerships, or graphic solutions, email Mactac.Americas@mactac.com or visit mactac.com/graphics.
