Product Description
Material Overview
SportFilm Lite heat transfer material is thin yet durable, cuts and weeds easily, and is great for lightweight active garments.
- Cuts & weeds easily
- Thin, flexible, & durable
- Semi-matte finish
- Not recommended for layered 2-color application
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Pressure-Sensitive
- Thickness: 90 microns
- Stretch & Rebound: 3
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
1-Color Application Instructions
Time:
10-12 seconds
Temperature:
302°F/150°C
Pressure:
Medium
Peel:
Warm
Sports Ball Heat Press Application Instructions
Time:
8 seconds
Temperature:
230°F/110°C
Pressure:
Firm (top platen should make contact with the ball 2 inches before final lockdown)
Peel:
Cool
Note: For textured balls, remove carrier and heat apply for an additional 8 seconds.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
SportFilm Lite is not recommended for two-color application.
If you’re having issues with the film peeling up with the carrier when releasing, allow the design to cool a little longer. If you’ve already started to lift the edges, complete a repress.
If you’re having issues with the film peeling up with the carrier when releasing, allow the design to cool a little longer. If you’ve already started to lift the edges, complete a repress.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
- Lycra®/Spandex Blends
- Nylon
