ColorJet™ III

Specialty Materials

No reviews yet Write a Review
$11.99

Are you looking to buy in bulk? Email us at sales@kgsupplies.com for your custom quote. 

$11.99

Description

Use ColorJet™ III to decorate t-shirts with your water-based/pigmented desktop inkjet printer!

ColorJet™ III is an opaque white material with a matte finish, coated for water-based inkjet printing. Use inkjet “print and cut system” or cut by hand.  You can apply ColorJet™ III with heated hand iron and firm downward pressure.  Make sure that the print is thoroughly dry before pressing.

ColorJet™ III Light for one step printing for light colored fabrics.  When printing, reverse the design and then the carrier becomes the transfer mask when heat-pressing.  When heat-activated, this material becomes clear.

ColorJet™ III Dark for dark fabrics.  This is an opaque material, so be sure to print the design ‘right-reading’ and then use a transfer mask to lift from the carrier before pressing.  We recommend our DTM-855.

Both products are available in packages of 8½” x 11″ and 11″ x 17″ sheets for easy use with desktop inkjet printers.

 

 

Application Instructions for Dark CJ3-2175

  • Print & Cut – Right reading. Remove image from release liner and place printed side up
  • Transfer Material – Do NOT use a transfer mask. Cover with Teflon or Transfer Tissue
  • Temp – 375° F
  • Pressure – Medium, even
  • Time – 25 seconds
  • PEEL Transfer Sheet when cooled – Do not re-press
  • Care – Hand wash and air dry. Do not dry clean. No bleach or aggressive detergents

Application Instructions for Light CJ3-2185

  • Print & Cut – Mirror image, trim excess white from design
  • Transfer Material  – Not necessary
  • Temp – 350° F
  • Pressure – Very firm, even. Lint roll garment before pressing.
  • Time – 20 seconds
  • Peel – COOL Do not re-press! 
  • Care – Hand wash and air dry. Do not dry clean. No bleach or aggressive detergents

Applies to: Cotton, Uncoated Polyester, Fabric Blends Excluding Nylon, Dazzle Cloth, Shiny Polyester, and Moisture-Wicking Materials

Special Precautions for Both: Make sure that the print is thoroughly dry before pressing. Do not stretch or cracking will occur. 

Special Precautions for Light CJ3-2185: Before pressing, use a lint roller to remove any dust or fibers on the garment.

 

Extra Information

Brand:
Specialty Materials