Description
If you love embroidery then you need Embroidery Glitter™! This is a high-quality embroidery appliqué with the same great look of the GlitterFlex® Ultra. It is time for the embroidery market to get in on the GlitterFlex® Ultra action!
This material comes ready for embroidering and has no carrier attached. It has a high-quality heat seal adhesive on the back for even more staying power. You can actually embroider any of our GlitterFlex® ULTRA – you would just need to remove the clear carrier first.
This product can be used on cheerleader uniforms, sweatshirts, hoodies, t-shirts, bags, etc. and can also be sublimated.
Sizing Available Available Widths (in.): 19.5” only Available Lengths (ft.): 15’, 30’, 45’, 60’, 75’, and 90’ rolls
Thickness 14 mils/350 microns
Manual Handling The Embroidery Glitter can be handled on any embroidery machine, just like a regular appliqué.
Design Use a design that has been digitized for appliqué. For best results, we suggest you embroider with a simple running stitch and thin satin stitch.
1. Sew a tight running stitch as a placement outline on the garment.
2. Cut a piece of Embroidery Glitter slightly larger than your design.
3. Lightly spray the back side with a temporary spray adhesive and place on garment.
4. Embroider the design using a simple running stitch and a thin satin stitch.
5. After stitching, simply pull away the excess material.
6. Finish by using the heat transfer settings below:
Application Instructions
- Temp – 320°-330° F
- Pressure – Cover with a Teflon Sheet and press with firm, even pressure
- Time – 12-15 seconds
- Care – Wash inside-out, warm water, gentle cycle, tumble dry low heat.
- Sublimation – Heat sublimation on top of already pressed vinyl at 390° F for 30 seconds.
