Flocking Sheets by Specialty Materials
Flocking Sheets add a 3D Flock effect to HotMelt or screen print adhesive. Get ready for fuzzy, high-quality, viscose flock with a soft, velvety feel!
This Flocking is part of a two-step process that requires laying down an adhesive product first before adhering.
We have two different kinds of plotter-cut adhesives that these Flocking Sheets are compatible with: PoliMelt and HotMelt.
Flocking Sheets are available in 20″x 14″ sheets only (Packs of 5 per color).
Application Instructions for Hotmelt
- Blade – 45°, very low pressure
- Cut – Mirror image, smooth side down
- Temp – 300° F
- Pressure – Medium, eve
- Time – 5 seconds
- Peel – Warm, almost hot
Application Instructions for Flocking Sheets
- Pressure – Place Flocking Sheet over Hotmelt, cover with Teflon Sheet, and press for 10 seconds. Rub with cloth, let cool, then peel.
- Care – Wash inside out, gentle cycle, cold water, line dry. Do not dry clean
Instructions for application to moisture-wicking materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then rub it into the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow better adhesion to the garment.
Instructions for application to dazzle cloth & shiny polyester fabrics: We highly recommend that you TEST prior to doing large runs. Coated polyester can routinely cause adhesion issues