Description
Reflection Protection™ BY SPECIALTY MATERIALS
Reflection Protection™ films consist of very small glass beads embedded in a layer of polyester film to reflect almost all the light that shines on them.
Reflection Protection™ is available in Certified Safety Reflective Colors, our Safety Silver collection. Safety Silver retro-reflective film produces a maximum reflectivity of 675 candela/lux/meter. This product does not have a sticky carrier.
Use Safety Silver for garments and other products used by police, firefighters, EMS, postal workers, traffic control, parking, utility, road, construction, security personnel, runners, bicyclists and motorbikers, among others.
Safety Silver for Cotton
Acceptable Fabrics
- Cotton and cotton-blend fabrics Excluding Nylon
Sizing Available
- Available Widths (in.): 19” only
- Available Lengths (ft.): 15’, 30’, 45’, 60’, 75’, 90’, & 162’ rolls
Thickness
- 5.6 mils/140 microns
Special Precautions
- Will NOT stretch.
Safety Silver for Nylon
Acceptable Fabrics
- Nylon and other heat-sensitive fabrics
Thickness
- 5.6 mils/140 microns
Sizing Available
- Available Widths (in.): 19” only
- Available Lengths (ft.): 15’, 30’, 45’, 60’, 75’, 90’, & 162’ rolls
Special Precautions
- Will NOT stretch.
Application Instructions
Remember to remove heat liner before plotting!
- Blade – 60°, slow cutting speed
- Cut – Mirror image
- Temp for 9501 – 320° F
- Temp for 9505 – 250-275° F
- Pressure – Firm, even
- Time – Prepress garment for 5 seconds, then press material for 3-5 seconds
- Peel – Warm for 9501 and Cold for 9505, cover with Teflon and repress for 10-15 seconds, let cool then remove Teflon
- Care – Wash inside out. Warm water, gentle cycle. Tumble dry low heat. Dry-cleaning ok.
- Layerable? – Top layer only
