KG Cast Wrapping Film by Kirin Global Supplies w/ Cast Laminate

SKU:
DAF-WrapFilm&Laminate-54150
Availability:
Manufacture Back Order
$999.00
Current Stock:

KG Cast Wrapping Film is a 2 mil Premium White CAST film with a Gloss finish and a permanent pressure sensitive adhesive with a stay-flat 90 lb. liner. This film is designed to accept a variety of solvent-based, latex and UV curable inks. This product is the right choice for those looking for a consistent 7-year Wrap Cast Vinyl for everyday use on a wide variety of vehicles and other challenging surfaces.

 
 

Key Features and Benefits

 
 

Face Film

  • Face Film: White CAST Print Film
  • Gauge: (ISO 2286-3) 2 mil (55 micron) nominal
  • Printer Compatibility: Latex, Eco-Solvent, Solvent, UVC, UV Gel

Adhesive

  • Type: Permanent grey solvent-based acrylic with air channels/bubble free
  • Application temperature: +5C to +60C
  • Service temperature: -30C to +110C

Release Liner

  • Weight: 146 gsm nominal
  • Type: Structured lay-flat with PE coating

Finishes

  • Gloss

Roll Size

  • 54″ x 150′

Durability

  • Shelf Life: 2 years from date of manufacture when stored in proper conditions 70*F and 50% RH.
  • External weathering: 7 years. This refers to the unprinted vinyl. Refer to ink manufacturer for
    the durability of the finished product.
 

Application

 
  • Allow a minimum of 24-48 hours for the solvents to dry off before application of the overlaminate, or to the vehicle. Depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels.
  • Successful vehicle wrap application requires the necessary techniques.
  • Apply dry to ensure the best adhesion. Use gentle heat to allow conformability. Do not overstretch as this will cause the application to fail.
  • After application ‘superheat’ the film into recesses at 100-105°C.
  • The user should determine the suitability of the substrate.

About the Laminate

This 1.4 mil Clear Premium Cast Wrapping Film is specially produced using the latest ingredients in the cast PVC formulation for lamination applications in conjunction with vehicle wrapping films. It is specifically designed for vehicle (cars, boats, trains) wrapping applications. This Premium quality product provides a long service life and brings high performance with its Premium quality, high gloss, printability and flexibility.

 
 

Key Features and Benefits

 
 

Face Film

  • 1.4 mil Clear Cast Vinyl
  • Solvent based Acrylic Clear Adhesive
  • Durability: 7-year Premium Film, Unprinted (under normal conditions, Mid-Country, USA)
  • Complex Curves, Simple Curves, Flat surfaces, Rivets
  • Liner: Highly Stable 138g/sqm Silicone Coated Kraft Paper

Finishes

  • Gloss

Roll Size

  • 54″ x 150′

Durability

  • Shelf Life: 2 years
  • External weathering: 7 years (unprinted vinyl. Refer to ink manufacturer for the durability of the finished product)
 

Application

 

Material Handling

  • This product is suitable for cold lamination using a laminator.
  • Ensure that the material has reached room temperature and relative humidity of 50% before use.

Over-laminating

  • Suitable for use on Solvent, Eco-Solvent Inkjet, and Latex prints.
  • The product is matched to DAF Premium Cast Every Day Vehicle Wrap Film. Matched laminates prevent tunneling and delamination.
  • Allow the inks to cure before over-laminating, usually 24-48 hours. Failure to do so can cause delamination, tunneling, and shrinkage.
  • Apply around 30*C on the top roller to prevent silvering of the adhesive.
  • The user should determine the suitability of the overlaminate to the print media.

car-wrap-vinyl.jpeg