Description
Anchor 153 SignBlast Stencil For use on friction-fed cutters. Can be used safely on pretreated and prepainted wood, urethane foamboard, glass, tile and acrylic. Rubber is trimmed back ½-inch along each edge so the wheels can clamp down on the 5-mil polyester film liner and carry the stencil through the computer. Since this type of plotter has no sprockets, holes are unnecessary (as in other computer stencils). Sizes available: 19 7⁄8-inch and 24-inch widths. The following data are nominal values based on PSTC, ASTM and other standard test. The data should not be considered as specifications. Adhesive Medium tack / Rubber Total Thickness (mil) 41 (1.04 mm) PSTC-133 Tensile Strength (lbs/in) 4 (17.5 N/25mm) PSTC-131 180º Adhesion to Steel (oz/in) 23 (25.2 N/25mm) PSTC-101 Elongation (% @ break) 250 PSTC-131
